Used temperature controllers

Extruder Double Door Control Cabinet Mercery Contactors, Watlow Temperature

🔥Extruder Double Door Control Cabinet Mercery Contactors, Watlow Temperature No Motor Contactor or Drive Cabinet is for controlling the heating zones. Contact for freight quote. INV# P-2403

WAYNE 1.25"

• Manufacturer: Wayne

Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt

DAVIS STANDARD 150INDS-20

• Manufacturer: Davis-Standard

Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...

DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

• Manufacturer: Davis-Standard
• Model: MV35IN35SR

107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....

3.5" Welex Single Screw Extruder, Model 350-30:1-LHV with Screen Changer & Melt Pump

• Manufacturer: Welex

Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp...

4.5" NRM Extruder, 20:1 L/D, 150 HP

• Manufacturer: NRM

4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...

2016 American Kuhne AK 125 24.1 A/C EXT

• Manufacturer: Kuhne

Length‑to‑Diameter (L/D) Ratio: 24:1 Equipped With • Air‑Cooled Barrel with High Capacity Blow‑On Cooling • Heated Clamp / Breaker Plate • Feed Section with Water Jacket and Needle Valve • Melt Pressure and Tempe...

45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D

• Manufacturer: Theysohn Extrusion

45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D Used 45mm Theysohn Twin Screw Extruder, model TSK-N-045, co rotating screw, 36:1 L/D ratio, electrically heated, water cooled barrel, (1) feed, (2) top and side ...

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP

• Manufacturer: Davis-Standard

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...

6" Gloucester Water Ring Pelletizing Line

• Manufacturer: Gloucester

6" Gloucester Water Ring Pelletizing Line Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed h...