Used torque

2003 CW BRABENDER INTELLI-TORQUE IT 7150

• Manufacturer: Brabender

Used C.W. Brabender Intelli-Torque IT-7150 Plasticorder Extruder System, Serial #E03-146. Currently equipped with a 24:1 L/D extruder barrel and ¾" (19 mm) screw with strand die, along with a water-cooled feed th...

KILLION KL-150

• Manufacturer: KILLION

Used 1.5” Killion Single-Screw Extruder Model: KL-150

90mm Shangdong Tongjia Extruder, 28:1 L/D, 50 HP

2 Downstream Zones, 5 Barrel Zones, Air Cooled 50 HP Siemens BEIDE Three Phase Asynchronous Inverter Duty Motor Model TYB1002 2CC2 9 0AA5 Z 250M IM B3 1176 RPM Rated Current 64 A @ 60 Hz Thermal Class F IP54 Enc...

60" Wide ESI Servo Cross Cut Saw, Model ASC, New in 2020

• Manufacturer: ESI

Unused 60" Wide ESI Cross Cut Saw, Model ASC, New in 2020 ASC Servo Saw Capable Of ± 0.020" In-Line Cut Length Accuracy 4000 RPM 640VDC F-Class Insulation, IP54 480/3/60, 33A Equipped with Edge Trim System Previo...

2" Novatec C-2 Fly Knife Cutter, 5 HP

• Manufacturer: Novatec

Used 2" Novatec C-2 Fly Knife Cutter, 5 HP 2" Max Profile Diameter 42" Centerline Height (Adjustable) 1,000 RPM Max Blade Speed 480/3/60 7" Siemens PLC Color Touchscreen, Store & Recall 30 Recipes Batch Counter, ...

6" x 50" Conair Belt Puller, Model BP6-50

• Manufacturer: Conair

Conair Belt Puller, Model BP6-50 50" Belt Contact Length, Independent Drive With 2Hp Motor 42.5" Centerline Height 460/3/60, 10.4A 1750 RPM 460/3/60, 3A - Motor 145TC Frame NEW WEG Drive Gear Ratio: 39.77:1 460/...

PSI Melt Pump, Model EGP-38, 2 HP

• Manufacturer: Polymer Systems

Used PSI Melt Pump, Model EGP-38, 2 HP 44" Centerline Height, +/- 4" Dynisco Transducer Model: PT4624-EM-6/18-B628, S/N: 04-02-09360267 With Electrical Panel, Siemens Touch Panel TP177 Micro 25 Amp Disconnect

Werner & Pfleiderer ZSK58 F96 Extruder - IPP# 210304

• Manufacturer: WP

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P

• Manufacturer: WP

Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...

SEW KA106R72LP

• Manufacturer: SEW-Eurodrive

Used SEW Eurodrive gearboxes. (3) previously used as direct drive for sheet extrusion chrome roll stack. Has 449:1 gear ratio. Gearbox type KA106R72LP 145TC. Torque 53.1 lbs/inch. Wt - 645# each Male - shaft - 3"...

2002 LEISTRITZ ZSE 100

• Manufacturer: Leistritz

Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Ne...