Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

10004

Used Extruders

  • Trusted Seller
    NORDSON ULTRAFLEX R-75

    NORDSON ULTRAFLEX R-75

    • Manufacturer: Nordson

    Used 59" Nordson/Extrusion Dies Inc Heavy Duty Sheet Die. Model Ultraflex R-75. Serial #73-1362-2-3. Has integral upper flexible lip and fixed removable lower lip. With adjusting bolts on 1" centers, 45 degree re...

    Hainesport, NJ
  • Trusted Seller
    1985 ALFONS MALL AT Impact

    1985 ALFONS MALL AT Impact Extrusion Trimmer

    • Manufacturer: ALFONS MALL

    Manufacture - Mall - Model AT - New 1985 Cans/Tubes Per Minute - 90 Can/Tube Size: - Diameter - 13.5-28.0mm current use (design allows 38mm max) - Length - 100-190mm MORE DETAIL COMING

    Banner Elk, NC
  • Trusted Seller
    1977 FIELDING & PLATT 1600mton

    1977 FIELDING & PLATT 1600mton Aluminum Extrusion Line

    • Manufacturer: FIELDING & PLATT

    Manufacture: - Fielding & Platt - New 1977 - Decommissioned 2013 in good running condition Scope - Press - complete and proper, installed and included - Press control cabinets installed and included - Billet hea...

    Banner Elk, NC
  • Trusted Seller
    SCHULER COLLAPSIBLE TUBE LINE

    SCHULER COLLAPSIBLE TUBE LINE

    • Manufacturer: Schuler

    Product Range: - 13.5-25.0 mm diameter Line Speed: - 67 parts per minute Equipment Extrusion Press - Schuler x100 / 1960 Trimming Machine - Mall / 1971 Annealing Oven - Sprimag /1973 Internal Coating Machine...

    Banner Elk, NC
  • Trusted Seller
    1976 SCHLOEMANN SIEMAG 1250 ton

    1976 SCHLOEMANN SIEMAG 1250 ton EXTRUSION PRESS

    • Manufacturer: SCHLOEMANN SIEMAG

    Manufacture: - Schloemann Siemag - New - 1976 Billet Size: - 7" (178mm) Type of Press: - Aluminum & Copper (designed for the addition of a piercer) - Horizontal, oil hydraulic, 4-column Specifications: - Main ...

    Banner Elk, NC
  • Trusted Seller
    UBE 1800ton Copper Extrusion Press

    UBE 1800ton Copper Extrusion Press

    • Manufacturer: UBE Industries

    FOR SALE !!! 1800mton UBE Brass/Copper Piercing Extrusion Line for Billet and Tube FOR SALE !!! Manufacture: - UBE - New - 1983 - Last major upgrade - 2010 - Decommissioned - 2023 Billet Size - Diameter =...

    Banner Elk, NC
  • Trusted Seller
    1990 Guzzi/Frattini C-24-150 Impact Extrusion

    1990 Guzzi/Frattini C-24-150 Impact Extrusion Necker

    • Manufacturer: Guzzi/Frattini

    Manufacturer: - Frattini (Guzzi) - Model C-24-150 - New = 1990? / nameplate was missing when rebuilt Necking Stations: - 24 Tooling: - 35mm diameter - 45mm diameter - Forty (40) tool holders included St...

    Banner Elk, NC
  • Trusted Seller
    1951 SCHULER X150 Impact Extrusion

    1951 SCHULER X150 Impact Extrusion Press

    • Manufacturer: Schuler

    Manufacture: - Schuler - Model X150 - New 1951 - Rebuilt 2014 Cans/Tubes per Minute: - 120 cpm Product Last Run: - Aluminum parts - Diameter - 13.5mm, 28mm, 35mm - Length - 180mm Weight and Dimensions: ...

    Banner Elk, NC
  • Trusted Seller
    WELEX, 200 24-1, 2", SINGLE

    WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER

    • Manufacturer: Welex

    WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER Model:200 24:-1

    Toronto, Canada
  • Trusted Seller
    2008 EMERSON MENTOR

    2008 EMERSON MENTOR

    • Manufacturer: Emerson

    Used 200 HP Emerson "Mentor" SCR Controller. Has 220/480 volt input, with 268 HP rating, and output 250/530 volt. New approximately 2008.

    Hainesport, NJ
  • Trusted Seller
    IDN IDHT Gaylord

    IDN IDHT Gaylord

    • Manufacturer: IDN IDHT

    Used IDN IDHT Gaylord tilter having a 4000 lb capacity.

    Hainesport, NJ
  • Trusted Seller
    2004 ALLIED DIES, INC. 20"

    2004 ALLIED DIES, INC. 20"

    • Manufacturer: Allied

    Used 20" Allied Dies Inc dual manifold sheet die. With 2" back center fed main entrance. 240 volts, 1PH 9 zones. 3" X 0" naked edge, .060" lip opening. Last used for PVC siding. Rebuilt by Allied Dies Inc in June...

    Hainesport, NJ
  • Trusted Seller
    PRODUCTION, INC. 20"

    PRODUCTION, INC. 20"

    • Manufacturer: PRODUCTION, INC.

    Used 20" Production Components dual manifold siding die. 2" diameter center back entrance for PVC and side entrance for acrylic.020-.060 gap opening. 3" X 3/8" naked edge. Upper adjustable lip and fixed integral ...

    Hainesport, NJ
  • Trusted Seller
    PRODUCTION, INC. 20"

    PRODUCTION, INC. 20"

    • Manufacturer: PRODUCTION, INC.

    Used 20" Production Inc dual manifold sheet die. With 2" back center fed main entrance. 240 volts, 1ph, 9 zones. 3" X 3/8" naked edge, .060" lip opening. Last used for PVC siding. Rebuilt by Allied Dies Inc in Ma...

    Hainesport, NJ
  • Trusted Seller
    NEW YORK 1708

    NEW YORK 1708

    • Manufacturer: NEW YORK

    Used New York Blower Model 1708 aluminum pressure blower. Has 10 HP motor with polycool unit.

    Hainesport, NJ
4041424344

Overview

Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

FAQ

What should I consider when buying a used extruder?

Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

How do I ensure the extruder is shipped safely to my location?

Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

What is the maintenance schedule for an extruder?

Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.