Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

9837

Used Extruders

  • Trusted Seller
    Buhler-Maig Extruder Single Screw M-MN-400

    Buhler-Maig Extruder Single Screw M-MN-400

    • Manufacturer: Bühler

    Buhler Maig Model M-MN-400, inline, single screw extruder with productions rates per hour – depending on materials and application. Equipped with product portioner and has product feed hopper with dual 36" long x...

    Carol Stream, IL
  • Trusted Seller
    DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

    DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

    • Manufacturer: Davis-Standard
    • Model: MV35IN35SR

    107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....

    Illinois, USA
  • Trusted Seller
    Sigma Equipment Extruder Single Screw

    Sigma Equipment Extruder Single Screw LE3D

    • Manufacturer: Sigma

    Sigma, Model LE-3D, duplex vacuum plodder/extruder. Capable of processing 40 kg/hr – depending on materials, application and machine configuration. Equipped with 13½" long x 12"wide x 8" deep stainless steel supp...

    Carol Stream, IL
  • Trusted Seller
    1999 BUSS MDS200-4 #0363624

    1999 BUSS MDS200-4 #0363624

    • Manufacturer: Buss
    • Model: MDS200-4

    8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm Includes: Buss Hot Cut Pelletizer Model PVW200 with oil heated/cooled die p...

    Toledo, OH
  • Trusted Seller
    Werner & Pfleiderer Extruder Twin

    Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P

    • Manufacturer: WP

    Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...

    Carol Stream, IL
  • Trusted Seller
    1999 PTI pelletizing line with

    1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder

    • Manufacturer: PTI

    1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox is a Flender m...

    Elk Grove Village, IL
  • Trusted Seller
    Leistritz Twin Screw Pelletizing Line,

    Leistritz Twin Screw Pelletizing Line, model Micro18-GG

    • Manufacturer: Leistritz

    Leistritz Twin Screw Pelletizing Line, model Micro18-GG Used Leistritz twin screw pelletizing line, model Micro18-GGL, 18 mm screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, wa...

    Cleveland, OH
  • Trusted Seller
    Welex 4.5" Pelletizing Line

    Welex 4.5" Pelletizing Line

    • Manufacturer: Welex

    The Welex 4.5" Pelletizing Line is a comprehensive recycling solution designed for efficient material processing. It features a 4.5-inch diameter vented barrel with a length-to-diameter (L/D) ratio of 36:1. Equip...

    $55,625 USD

    Get financing

    Est. $1,047/mo

    Ohio, USA
  • Trusted Seller
    1960 4000 Ton Soutwark Extrusion

    1960 4000 Ton Soutwark Extrusion Press #2160714

    • Manufacturer: Southwark

    SPECIFICATIONS: 4000 Ton Soutwark Extrusion Press * 4000 ton * Max billet size 12" x 38" * Die stack is 20" x 23.5" * Modern die shuffle * Oilgear pumps PVV200 * 300HP Motors * Hydraulics upgraded in 2010 (cost $...

    Toledo, OH
  • Trusted Seller
    Zumbach Surface Fault Detector, Model

    Zumbach Surface Fault Detector, Model KW20

    • Manufacturer: Zumbach

    Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 3072.1559.

    Cleveland, OH
  • Trusted Seller
    RDN Die Cutter, Model GCT

    RDN Die Cutter, Model GCT

    • Manufacturer: RDN

    RDN Die Cutter, Model GCT Used RDN die cutter/guillotine, model GCT, " blade, 115 volts, serial# 31115-1, built 1993.

    Cleveland, OH
  • Trusted Seller
    Tinius-Olsen Extrusion Plastometer

    Tinius-Olsen Extrusion Plastometer

    • Manufacturer: Tinius-Olsen

    Tinius-Olsen Extrusion Plastometer Used Tinius-Olsen extrusion plastometer, benchtop design, with heater and controls, serial# 172911-1.

    Cleveland, OH
  • Trusted Seller
    Zumbach Surface Fault Detector, Model

    Zumbach Surface Fault Detector, Model KW20

    • Manufacturer: Zumbach

    Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 7142.0002.

    Cleveland, OH
  • Trusted Seller
    Zumbach Surface Fault Detector, Model

    Zumbach Surface Fault Detector, Model KW20

    • Manufacturer: Zumbach

    Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2709.1262.

    Cleveland, OH
  • Trusted Seller
    Zumbach Surface Fault Detector, Model

    Zumbach Surface Fault Detector, Model KW20

    • Manufacturer: Zumbach

    Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2795.1353.

    Cleveland, OH
  • no-image_en.png

    Shanghai Shende SDETA 135 - 75 Kw Extruder

    • Manufacturer: Shanghai Shende
    • Model: SDETA 135 - 75 Kw

    Good condition Shanghai Shende SDETA 135 - 75 Kw Extruders. Located in Netherlands and other countries. Click request price for more information.

    Netherlands
910111213

Overview

Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

FAQ

What should I consider when buying a used extruder?

Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

How do I ensure the extruder is shipped safely to my location?

Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

What is the maintenance schedule for an extruder?

Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.