Used Sheet Metal Processing in Saxony, Germany

1985 KAISER V 40

• Manufacturer: Kaiser
• Power requirement: 15.2 kilowatt

40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic

1982 PEDDINGHAUS Perfefekt 55KA/PA/PLA

• Manufacturer: Peddinghaus

Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. T...

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

Weingarten UZH 80

• Manufacturer: Weingarten

This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE
• Power requirement: 1.5 kilowatt

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB
• Power requirement: 1.2 kilowatt

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

2001 TRUMPF-PULZER MR65R

• Manufacturer: Trumpf
• Power requirement: 34.4 kilowatt

It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrou...

1995 Schröder Ducter 1500

• Manufacturer: Schroeder
• Power requirement: 2 kilowatt

CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation...

1991 HEIDEL MB W 140 OP 4

• Manufacturer: HEIDEL
• Power requirement: 25 kilowatt

CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upp...

1981 Strojarne Piesok XZP 100/12

• Manufacturer: ESPE/Piesok
• Model: XZP 10012
• Power requirement: 15.1 kilowatt

The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjuste...

1980 NICHT BEKANNT 23N/8

• Manufacturer: NICHT BEKANNT

Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

1975 L.A.S.A. MONTRAGON LR 6 200 DL

• Manufacturer: L.A.S.A. MONTRAGON
• Power requirement: 7.5 kilowatt

Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160...

1997 HIRSCHMILLER und HÖHN NCB 4000

• Manufacturer: HIRSCHMILLER und HÖHN
• Power requirement: 10 kilowatt

fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul...

1994 TWM Faber RE-Mat 145

• Manufacturer: Faber
• Power requirement: 3.5 kilowatt

Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1....

2011 Schwarze Robitec CNC 60 TB MR

• Manufacturer: Schwarze-Robitec
• Power requirement: 55 kilowatt

This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø ...