Used rollers

72″ x .075″ x 40000Lb Rowe / Herr Voss CTL Line

• Manufacturer: Herr Voss

used cut to length line for sheet metal processing 72″ x .075″ x 40,000Lb Rowe / Herr Voss CTL Line Entry Coil Car Floor Standing V-Type Design Powered Lift & Traverse Control Panel Mandrel Uncoiler 4-Leaf Mandre...

SAVOYE INTELIS

• Manufacturer: SAVOYE

was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packa...

Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789)

• Manufacturer: Pro Eco

Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Excellent conditions SPE...

Pivot Shear Trapezoid Shear Cut to Length

• Manufacturer: MH

Process flow: ↗ pressure lead Transportation → feeding → uncoiling → clamping initial bridge → transition → guide pressing → slitting → passing The straight end, the shovel-end Transit → guide → fine leveling → f...

AUTOMATIC CUTTING CENTER FAT-SIMEC MEC-120-CNC-M 06711

• Manufacturer: Simec

74, 50013 Zaragoza (Spain) REF. 06711 Machine AUTOMATIC CUTTING CNC CENTER MEC-120-CNC-M Main Technical Data - Minimum in profile 12 12 - Maximum in solid 60 60 - Maximum profile 100 90 x 90 120 X 80 Cutting whee...

2002 Pedax GmbH Combiline + Permatic

• Manufacturer: Pedax GmbH

The Center consists of: 1. Combiline in turn consisting of a. Mobile rebar storage area 12m, 5 slots, b. Hydraulic plant and electrical board, c. Shear unit, with control console, and 12m run-off kicking of...

2008 Pedax GmbH Combiline G

• Manufacturer: Pedax GmbH

Automatic Cutting Bench consisting of a mobile rebar storage area, the machine main body with the stopless measuring and pull-in feeding system, the hydraulic guilotine cutter, the Siemens S7 panel PC, and the ro...

SABILA 1500x4mm CTLL (Used) #4916

• Manufacturer: SABILA

€ 260.000 1500mm x 4mm / 20ton Flying shear type - speed: 14m / minute INSTALLED & UNDER POWER Line footprint: about 20m x 10m Decoiler Coil loading saddle Peeler station Leveler Flying shear Evacuation...

Cutting line without marking product code: 25477

Hurry! This product has already been viewed 2,583 times! Don't miss out! ENGLISH BELOW Scoreless cutting line The machine allows for pulling, flattening, and cutting into strips, starting from the sheet metal ro...

2000 Schnell SpA Optibat 65T/3/12

• Manufacturer: Schnell

The machine has been refurbished: The Front Part (3 Corridors of Conveyor Rollers) has been changed – NEW The Train Motor has been replaced – NEW The Break Motor has been replaced – NEW All Rollers were replaced...

Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear)

Cut to length line LDM Spotti 1500x6x25t is used for sheet metal cutting up to 6mm metal thickness. CTL line is equipped with two levelers and flying shear LDM CUT TO LENGTH LINE 1500X6 YEAR OF CONSTRUCTION 2000 ...

LDM Spotti Cut to length line 1500x6x25t (two levelers, flying shear)

• Manufacturer: LDM Spotti

Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear) Make: LDM SPOTTI YEAR OF CONSTRUCTION 2000 TYPE 1500X6 THICKNESS 0.5 mm – 6.0 mm WIDTH 390 mm – 1500 mm SPEED 30 m/min UNCOILER CAPACIT...

2003 Galanos SA – Kiklops VR32/3/RB001

• Manufacturer: Kiklops Galanos

Automatic Cutting Plant consisting of an easily connected to the main body bundles’ storage area of 10 compartments, and the machine main body which runs on rails in order for the pulling unit to align with the c...