Used Machine Tools in Saxony, Germany

WMW Drill

• Manufacturer: WMW

Twist drill WMW Ø 69 mm x 425 mm HSS used, tested !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

Clamping table 3400 x 2020 x 340 mm

Clamping table Drill holes: 48 x 30 mm 94 x 24 mm 12 x 20 mm plate in two parts used, top condition !

Clamping table 4720 x 2120 x 730 mm

Clamping table Drill holes: 16 x 30 mm 200 x 24 mm 2 x 20 mm 21 x 16 mm used, top condition !

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS clamping plate

• Manufacturer: Pagus

Clamping plate, clamping table, drilling table, machine table, T-slot plate WMW / PAGUS Work surface: 4000 x 1500 mm 5 grooves Groove width: 28 / 49 mm, groove depth: 52 mm 2x insertion opening for sliding blocks...

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

PAGUS clamping plate

• Manufacturer: Pagus

Clamping plate, clamping table, drilling table, machine table, T-slotted plate PAGUS Groove width: 14 / 24 mm, groove depth: 18 mm Side groove: width: 14 mm, depth: 5 mm, 32x M12 x 1.75, depth: 25 mm Bottom groov...

Moritz Perthel MP 400 x 200

• Manufacturer: Moritz Perthel

MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm)

WMW AW 625x520x820 (Nr. 24+25)

• Manufacturer: WMW

2 pieces available (price per piece) without T-slots Oblong hole Ø 33 x 330 mm

WMW AW 2600x900x1200 (5801+5830)

• Manufacturer: WMW

Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slot...

WMW AW 1300x1000x1600 (Nr. 3-6)

• Manufacturer: WMW

3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage bezi...

WMW AW 250x250x180

• Manufacturer: WMW

2 pieces clamping angle available (No. 1104021 A is slightly thinner)

WMW AW 630x800x1600 (Nr. 9)

• Manufacturer: WMW

T-slots to DIN 650: T-slot width a= 28; h= 48; b= 49; c= 22 mm; T-slot spacing 200 mm 22 mm