Used Machine Tools in Flanders, Belgium

2002 ITALPRESSE PM/DE/1 SPECIAL Horizonal press, manual fed

• Manufacturer: Italpresse

Cold press for flush doors The PM/DE for cold curing of doors or laminated panel stacks. Materials prepared in stacks approximately 1000 mm high are transported on motorized chains to the fixed base plate of the ...

1992 DEMETS Horizonal press, manual fed

Press plate dimensions: 3200 x 1300 mm. Opening: 35 cm. Electrically heated press plates Elkon 6 underlying hydraulic cylinders

2007 ITALPRESSE IDEAL/6-F Horizonal press, manual fed

• Manufacturer: Italpresse

PLATEN size mm. 3100 x 1300 Pressure cylinders with deep-chromed stems Cylinder stroke mm. 510 6 Cylinders Max opening between the platens mm. 510 Hydraulic unit installed power Kw. 2,2 Upstroke movement of botto...

2008 SORMEC T 90 Horizonal press, manual fed

• Manufacturer: sormec

Cold press Press platen sizes: 3100 x 1300 mm. Opening: 420 mm 6 hydraulic upstroke rams: 6 x 70 mm Total pressure: 90 tons

Innse TVM 450/5

• Manufacturer: Innse

Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bes...

2015 BROTHER YM 200 BM Sawdust Producer

• Manufacturer: Brother

Powerful 1 step process turning wood from logs or waste wood into sawdust (no chipper, hammer mill or grinder needed) Ideal preparation for pellet production Cutting drum crushing system -Max working capacity: ap...

ROBLAND Z 500 EL Panel-sizing circular saw

• Manufacturer: Robland

Year of construction: Tension: 400V 50Hz 3Ph

Mingori mingori

• Manufacturer: Mingori

Mingori mingori

Berthiez Ø 4500 mm NC

• Manufacturer: Berthiez

Berthiez BM 225 sermi-automaat Variabele snelheidsregeling voor de klauwplaat Variabele snelheidsregeling voor de toevoer Maximale slag van de ram: 1000 mm Toren kan 45° en 30° kantelen Maximale werkstukdiameter:...

Dorries SD 600/6500

• Manufacturer: Dörries Scharmann

Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton kop...

Turntable dia 4200 mm x 80 ton

• Manufacturer: Turntable

hydrostatische belasting nieuwe frequentieregeling, 2 snelheden: - eerste snelheid: indexering - tweede snelheid: draaien max gewicht op tafel: 80 ton diameter van de tafel: 4200 mm transportafmetingen: 4200 x 42...

ROBLAND SD 510 Over- and Underplaner

• Manufacturer: Robland

Year of construction: Tension: 400V 50Hz 3Ph

Schiess Ø 2070 x H 1000 mm

• Manufacturer: Schiess Froriep

Schiess Ø 2070 x H 1000 mm Chuck dia.: Ø 1700 mm | Max turningdia -- passage: Ø 2070 mm - H 1330 mm | Power on the spindle: 30 kW | Max hight of workpiece z-axis: 1330 mm (Z | Number of speeds: 1.7 -> 53 rpm | H...

Bandelin Ultrasone Cleaner wtih heating 600 x 450 x 450 m

• Manufacturer: Bandelin

Bandelin Sonorex Technik RM 110 UH f: 40 kHz temp. set: 30-80 °C Heating Power: 4.8 kW Utrasonic Power: 1000 W nominal - 4000 W in peak serie Nr: 8230.00004091.001 Ultransoon Cleaning / Ultrasone

Alpheus Cleanblast Dry Ice Pellet Blasting - 290

• Manufacturer: Alpheus Cleanblast

Strahlmaschine cold jet dry Ice pellet blasting - Décapage a la glace seche - Reinigung mit Trockeneis - Limpiezacon hielo seco - Droog ijs parel straal installatie Aircompressor Altas Copco GR 200 * 20 bar - 20...