Used Processing in Illinois, USA

AMFEC 175

• Manufacturer: AMFEC

AMFEC 175 Vacuum Pass-Through Tumbler. 500lbs-15,000lbs capacity, all stainless steel construction, variable speed controls, pivoting doors, vacuum system, dual wheel drive, 20 hp drive motor, 7.5 hp vacuum pump,...

FPEC Work Platform

• Manufacturer: m & m equipment

FPEC Work Platform. All stainless steel worker platform. 6’5″ long x 7’5″ wide x 5’5″ tall mezzanine. Includes 9′ tall handrails, with entrance & exit stairs for the work area.

FPEC Work Platform

• Manufacturer: FPEC

FPEC Work Platform. All stainless steel worker platform. 22′ long x 6′ wide x 5’5″ tall. Includes 9′ tall hand rails, (1) set of entrance & exit stairs for the work area.

Vemag 500

• Manufacturer: Vemag
• Model: 500

VEMAG 500 Vacuum Stuffer. 300# capacity hopper. PC 878 Digital control panel, Twist link drive. Fill rate up to 2,700 kg/h, portion speed up to 650 portions/minute. 220V/3ph/60Hz. This listing consists of stock p...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Ross Mill Colloid HSM-410

• Manufacturer: Ross
• Model: HSM-410

Ross, model HSM-410, 304 stainless steel, inline, high shear mixer. Rated up to 240 GPM. Rates dependant on materials, application and machine configuration. Equipped with 2" Tri-clamp infeed, 2" Tri-clamp discha...

Ross Mill Colloid ME-401

• Manufacturer: Ross
• Model: ME-401

Ross, model ME-40, 316 stainless steel, inline, high shear mixer. Equipped with 2½" ID stator, 1½" Tri-clamp infeed, 1" ID / 2" OD Tri-clamp discharge and powered by a 1½ hp drive. Rates dependant on materials, a...

Feeder Auger 10 CU FT

10 cu ft, S/S, pre feeder with product trough, and dual feed screws. Has 4 1/2" flanged end bottom discharge with a 14" floor clearance, and a Reliance Electric 3/4 Hp AC motor drive, and mounted on (4) leg base ...

Gough Econ Feeder Auger 14" DIA

• Manufacturer: Gough Econ

Gough Econ, 335" long x 14" diameter, stainless steel, screw feeder. Equipped with 19" OD / 15" ID flanged top infeed, 5 hp drive, and (4) 19" x 19" flanged discharges.

Sidel Feeder Incline/Cleated GEBO AIDLIN

• Manufacturer: Sidel

Sidel, model Gebo Aidlin, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 2000 caps per minute – depending on materials, application and machine configuration. Capa...

Fitzpatrick Mill Roller (Mill) 20"L X 9"D

• Manufacturer: Fitzpatrick

Fitzmill, Model 20, guiloriver, prebreaker with pounds of product per hour – depending on materials and application. Equipped with stainless steel contact parts and 21" x 40" product feed throat with 94" charge h...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Belcor Sealer Case Taper 505S/252TB

• Manufacturer: Belcor

Belcor, Model 505S / 252, Semi-automatic case erector packer and uniform, top and bottom case taper. Rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity. Case size ra...

Meyer Inc Airlock KIP12

• Manufacturer: Meyer

Meyer, Model KIP, 316 stainless steel, rotary airlock. Equipped with a 15" long feed throat with bag clamp, 12" diameter inlet and outlet, 19" diameter flanges, (8) vanes and powered by a 1½ hp drive with an 83....