Used machine tools in Greece

Cutting machines

• new

Description VERTICUT technical characteristics No. 2 fusion carbide cutting discs with a diameter of 400 mm No.2 pneumatic vertical vise No.2 three-phase motors, 1.1 kW, 2800 rpm Maximum V cutting capacity: 83 mm...

Cutting machines

• new

Description Technical characteristics TR 152 No. 2 tungsten carbide cutting discs with a diameter of 550 mm Checklist No.4 vertical clamps on each head No.1 horizontal clamp on each head Movable reel head (2m) US...

Automatic bridge sawing machine

• new

Automatic bridge sawing machine Pneumatic device to rotate the cutting head up to 0° to 90°. Motor unit with mechanical tilt facility to maximum 45°. Αutomatic bridge sawing machine for marble, granite and stone....

Swedlinghaus Meat Bandsaw | Blade 3100mm

• new

• Manufacturer: OmegaOne
• Motor: 2,7 HP Kw 2,00

Versions CE The s/steel bone bandsaws are recommended for professional use to cut frozen or fresh products and bones. AISI304 s/steel body, waste drawer accessible from the outside, cast aluminium alloy pulleys, ...

Swedlinghaus SEG1600V Table Top Meat Bandsaw | Blade 1800mm

• new

• Manufacturer: OmegaOne

Versions CE Model SEG 1800V Painted grey aluminium body, cast aluminium pulleys, s/steel worktop, s/steel portion gauge and meat pusher, door safety micro/switch, low voltage controls and mushroom emergency butto...

Swedlinghaus Meat Bandsaw | Blade 2400mm

• new

• Manufacturer: OmegaOne

Versions CE The s/steel bone bandsaws are recommended for professional use to cut frozen or fresh products and bones. AISI304 s/steel body, waste drawer accessible from the outside, cast aluminium alloy pulleys, ...

Swedlinghaus SEG1600V Table Top Meat Bandsaw | Blade 1610mm

• new

• Manufacturer: OmegaOne

Versions CE Model SEG 1600V Painted grey aluminium body, cast aluminium pulleys, s/steel worktop, s/steel portion gauge and meat pusher, door safety micro/switch, low voltage controls and mushroom emergency butto...

Machinery

• new

Description Technical characteristics Head tilt up to 22.5 the clockwise/anticlockwise (and intermediate positions) Built-in protectors 600 mm diameter carbide cutting disc Three-phase motor 400V 50/60 Hz 3 Kw 2,...

Machinery

• new

Description Technical characteristics Head tilt up to 22.5 the clockwise/anticlockwise (automatic setting in 22.5 the , 45 the , 90 the ) Manual head tilt adjustment at intermediate angles (mechanical stop) Built...

German band saw

• used

Saw type: Plumbing | Cutting ability: Φ250

Iron band saw

• used

Saw type: Mechanical engineering

Bandeau Forte

• used

• Manufacturer: Forte

Saw type: Plumbing | Cutting ability: Φ250

Iron band saw

• used

Iron band saw

• used

Saw type: Mechanical engineering

German PEHAKA band saw

• used

• Manufacturer: Pehaka

Saw type: Mechanical engineering | Cutting ability: Φ250