Used Processing in Canada

13,122 Liter Carbon Steel Flat Bottom Tank

-Straight side height: 12.4' or 148" -Diameter: 6.11' or 83" -Shipping dimensions: -Height: 13.10' or 166" -Diameter: 88" or 7.4' -Approximate weight: 3,600 pounds -Manhole on top -Inlet & outlet: 2"

3,800 Liters poly tank on steel base

• Manufacturer: Poly Gator

-Capacity: -844.44 Imperial gallons -1,013 U.S. Gallons -3,834 Liters -Manufacturer: Poly Gator -Liquid holding tank -Cone bottom -Inlet & outlet: 2.5" -Manhole on top -Tank dimensions: -Height straight side: 32....

13,122 Liter Carbon Steel Flat Bottom Tank

-Straight side height: 12.4' or 148" -Diameter: 6.11' or 83" -Shipping dimensions: -Height: 13.10' or 166" -Diameter: 88" or 7.4' -Approximate weight: 3,600 pounds -Manhole on top -Inlet & outlet: 2"

Fume extractor

• Manufacturer: Nedermann

-Nederman Filter box -Shipping dimensions: 53" L x 37" W x 57" H -Lafert motor: 3 HP, 3495 RPM, 575 V, 60 hz, 3 ph

Lightnin Mixer

• Manufacturer: Lightnin

-Volt: 110/220, Phase: 1, RPM: 1725, HP:1/4, AMPS: 5/2.5 -Shipping dimensions: 10" L x 10" W x 19 1/2" H -Motor model: MVF-R1451-1BS

30 liters Stainless Tank

-Shipping dimensions: 29" L x 29" W x 57" H -Try clamp connections -Volume sight glass on side, with turn style nobs -Bottom valve is 1” -Bottom side valves .5” -Tank cleaner -Filling spout -Three stationary legs...

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

Maglube In-Line Oiler

• Manufacturer: Alliance Group inc

Manufacturer: Alliance Group Inc -Model number: MAG3-9PV -Serial number: 12255

450 Litres Poly Tank

-Shipping dimensions: 26 1/2" L x 26 1/2" W x 58" H -About 90 imp gallons

5,645 Litres cone bottom tank on four legs

-Dimensions: 42" high x incline is 24" x 63.5" diameter -Shipping dimensions: 71" diameter x 87" total height with handles -2" draine -Half lid top -4 stationary legs

2,273 Litres stainless steel open top tank

-Dome bottoms -4, 25" legs -Open top -2" tri clamp nipple at bottom -Dimensions: 61" tall x 54" -500 imp

11,383 Liter Double walled plastic tank

-Double walled -Flat bottom -Plastic -Closed top -2,504 IMP

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs -1,500 imperial gallon tank -Shipping dims: 180" long/tall x 70" wide approximately 2000 pounds

Particulate filtration Circulation system

• Manufacturer: Filmax

-230/460 Volts 3 PH , 2/1 Amps -.5HP -1725 RPM -Dimensions: 48" Length x 40" Width x 36" Height -Circulation pump through filter unit, was used for fine oil

Shanklin T-7H Shrink Wrapping Machine

• Manufacturer: Shanklin
• Model: T-7H

Good condition Shanklin T-7H Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.