Country

  • DAVIS & WELLS UNK

    $1,450 - Matthews, NC Recently Added
    • Manufacturer: FAIR

    davis & wells table saw | used cast iron table 5 hp motor 0-45 degree tilt no blade guard

  • 2015 FAIR MFG 7825

    No price - Huron, SD
    • Manufacturer: FAIR

    fair 7825 bale processor

  • 1998 Mori-Seiki SL-45C Lathe 1120

    No price - Louisiana, USA
    • Manufacturer: FAIR

    year: late 90’s/early 2000’s, mori-seiki sl-45 – s/n 238. the lathe runs at 220v 3 phase, has a frequency of 50 hz, and it's rated power is 60kv. it has remained under power here but never ran afte...

  • JMK 530 Engine Lathe 1137

    No price - Louisiana, USA
    • Manufacturer: FAIR

    530 jmk engine lathe, needs repairs - 21"x60" - scales and dro

  • PLATARG 811 eyelet transfer press, 12 station deep draw press

    $85,000 - Alabama, USA
    • Manufacturer: FAIR

    platarg 811 eyelet transfer press number of stations 12 (11+1) capacity per ram 8 tons standard stroke 4.5" (114mm) max shell height 2.13" (54mm) standard ram pitch 3.25" (82mm) blank dia. 3.15" (8...

  • 4 L Used Gisholt Saddle Type Turret Lathe

    No price - Navasota, TX
    • Manufacturer: FAIR
    • Spindle Nose: A-1-20

    weight: 25,000 lbs. | coolant: yes | chuck size: 24" 4-jaw | feeds long: .005 to 176 i.p.r. | main motor: 25 hp | feeds cross: .0025 to .88 i.p.r. | floor space: 308" x 72" x 64" v | spindle hole:...

  • 12" X 36" Used Tannewitz Vertical Saw

    No price - Navasota, TX
    • Manufacturer: FAIR
    • Motor: 1.5 Hp 440 / 3

    throat: 36" | blade size: 1/16" to 1-1/4" | main motor: 1.5 hp 440 / 3 | table size: 36"x42" | blade length: 192" | blade speeds: 10 to 2,000 rpm's | blade welder: yes | blade grinder: yes | condi...

  • 1988 Drilltech D25KS Rotary Blast Hole Drill

    $85,000 - United States
    • Manufacturer: FAIR

    note: this drill is a horse and surprisingly fuel efficient for 750 hp. 1988 drilltech d25ks rotary blast hole drill asking price: $85,000.00 or best offer 850/350 compressor serial number; 731449 ...

  • 22" X 100"Tarnow Engine Lathe

    No price - Navasota, TX
    • Manufacturer: FAIR
    • Spindle Nose: D-1-11

    feeds: .0058 to .121 i.p.r. | height: 5'5" | weight: 9,000 lbs. | coolant: yes | chuck size: 16" 4-jaw | main motor: 15 hp. | steady rest: 11-1/2" | spindle hole: 3-1/2" | spindle nose: d-1-11 | s...

  • 17" X 100" Used Turn-Nado (South Bend) Engine Lathe

    No price - Navasota, TX
    • Manufacturer: FAIR
    • Spindle Nose: D-1-8

    feeds: .0021 to .1242 i.p.r. | weight: 4,500 lbs. | coolant: yes | chuck size: 14" x 4 jaw | main motor: 7.5 hp. 220 /440 | steady rest: no | spindle hole: 3-9/16" | spindle nose: d-1-8 | threads ...