search

Category

Country

  • Farrel OOC BANBURY MIXER

    No price - Cleveland, OH
    • Manufacturer: Farrel

    used farrel banbury mixer, model 00c, mixing chamber net volume 258 cubic inches, 4.24 liters, 1.12 gallons, approximate batch weight 7 pounds, 3.18 kilograms, jacketed stainless steel sides, (2) t...

  • Farrel 9FCM MIXING CHAMBER

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used 9fcm farrel continuous mixing chamber, jacketed for 50 psi at 560 f, serial# 85v1083, built 1985.

  • Farrel 3D FARREL-POMINI UNIDRIVE GEARBOX, 350 HP

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used farrel-pomini model 3d banbury unidrive, herringbone, gear design, gear box requires small pit for bull gear, 350 h.p., s/n 31648, giri #960-70-61.

  • Farrel CP12 CONTINUOUS MIXER/EXTRUDER

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used farrel continuous mixer/extruder, with farrel cp12 continuous mixer, 5 hp 230/460 volt motor, mixer discharges directly into a 2" davis standard extruder, model dsm20, 12:1 l/d, electr...

  • Farrel CP45 CONTINUOUS MIXER/EXTRUDER

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used farrel model cp45 compounding system, 4fcm continuous mixer with 100 hp dc motor, 5" extruder, 8:1 l/d, electrically heated, air cooled, non-vented, driven by 60 hp dc motor, strand di...

  • Farrel 2.5" DUMP EXTRUDER, 16:1 ;/D

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used 2.5" farrel single screw extruder, approximate 16:1 l/d ratio, electrically heated, air cooled non-vented 3 zone barrel, no blowers, water cooled feed throat with ram feed, approximate...

  • Farrel 3D UNI DRIVE GEAR BOX

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used farrel 3d uni drive gear box, 9.034:1 and 11.652.1 gear box ratio's, machine #67a4951.

  • FARREL S1-1812 INCREASER W/SHAFT DRIVEN L.O.P.

    No price - La Porte, TX
    • Manufacturer: Farrel

    w/shaft driven l.o.p.; 18"offset; hp: 2300 | qty: 1 | v/h: h | type: increaser | ratio: 4.93 | input rpm: 1200 | driving no: 56632 | output rpm: 5914

  • Farrel 22" X 60" TWO ROLL MILL ROLL

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) farrel two roll mill roll for 22" x 60" mill, cored, for driven side.

  • 1964 Farrel V-522-AC 6" X 12" TWO ROLL MILL

    No price - Cleveland, OH
    • Manufacturer: Farrel

    one (1) used farrel two roll mill, 6" diameter x 13" faced rolls, cored rolls, micrometer roll adjustments, end guides, knife discharge, cabinet design, individually driven rolls each with 5 hp 208...