Used pull type

Trusted Seller
2018 Beretta T21
- Manufacturer: Beretta
- Hours: 300 hour
Used Beretta T21 Geotechnical Drill Rig for sale. 300 Hours Electric Engine 11KW – 14HP Fixed Rubber Track Width 600mm (Max Width 820mm Without Controls Mounted) Standard 2 Speed Rotary Head type 22-2V (Max Torqu...
$38,955 USD
Stockton-on-Tees, United Kingdom
2008 Massenza MI6
- Manufacturer: Massenza
- Model: MI6
Truck mounted Hydraulic drilling rig Mounted on 2008 Right hand drive Iveco Eurocargo 4x2 truck 6437 hours For well drilling and to carry out explorations in any type of ground Geothermal drilling and micro piles...
Middlesbrough, United Kingdom
1981 Chicago Pneumatic CP650
- Manufacturer: Chicago
Reverse Circulation Water Well Drill Rig Mounted on 6x4 Crane Carrier truck Caterpillar Engine CAT 3406 Onboard Air Compressor: GHH 825 CFM / 350 PSI Twin Screw Injection Pump: Comet APS 71 ltr/min @ 580 PSI Casi...
Middlesbrough, United Kingdom
2019 Casagrande C6XP2
- Manufacturer: Casagrande
- Model: C6 XP
- Hours: 3,045 hour
Micropiling rig with 3045 working hours Double safety gates T20EP rotary head max torque 15,200Nm Rotation speed 52-400rpm Through-hole passage 130mmMast/Stroke length 6000/4100mm M5-M5S clamps working range 76-4...
Middlesbrough, United Kingdom
2014 Comacchio MC 5D
- Manufacturer: Comacchio
- Model: MC5D
- Hours: 1,163 hour
Mini piling rig with 1163 working hours Max mast push/pull 5000daN Fitted with hydraulic casing clamp/auger guide (has required hydraulics to install double hydraulic clamps) Centering device Guiding insert diame...
Middlesbrough, United Kingdom
Trusted Seller
2016 Delmag RH18/200
- Manufacturer: Delmag
DELMAG DRILLING RIG RH 18/200 (YOM 2016 / serial no. G0008502) consisting of: – leader mast (2 sections) in high strength box-type design assembled in the following structure: * intermediate leader mast section i...
Germany
Trusted Seller
Used CASAGRANDE C6 Drilling machine
- Manufacturer: Casagrande
- Model: C6
N°1 drilling rig, make casgrande, model C6 Fully overhauled Diesel engine make deutz, model F6L912, air cooled, power 100 hp Feed travel fitted for 3 mt long drill rods (effective feed travel 4000 mm) Max pull ba...
Fidenza, Italy
MAIT HR 300-570 DW
- Manufacturer: Mait
- Model: HR300
- Hours: 50 hour
The HR 300-570 is a large drilling rig, weighing about 90-95 tons. It is specially designed without articulation to increase the stability of the tower and withstand the high torque that is achieved with the MCS ...
Osimo, Italy
MAIT HR 300-570 THH
- Manufacturer: Mait
- Model: HR300
- Hours: 22.5 hour
The HR 300-570 is a large drilling rig, weighing about 90-95 tons. It is specially designed without articulation to increase the stability of the tower and withstand the high torque that is achieved with the MCS ...
Osimo, Italy
Trusted Seller
Drilling machine FRASTE FS400 on Magirus
- Manufacturer: Fraste
N°1 drilling rig, make Fraste, model FS 400 installed on Magirus 3 axles 6x6 Deck engine IVECO -Aifo, 6-cylinder, water cooled, power 260 hp mat fitted for 6 mt long drill rods max pull back force: 25 ton Rotary ...
Fidenza, Italy
Trusted Seller
Used CASAGRANDE C8 Drilling machine
- Manufacturer: Casagrande
- Model: C8
N°1 drilling rig, make Casagrande, model c8, crawler mounted For vertical piles, anchors and jet grouting operations Fully overhauled. Diesel engine make Deutz, model BF6L 913, power 150 hp, air cooled Feed trave...
Fidenza, Italy
MAIT MP M10
- Manufacturer: Mait
- Model: MP-M10
MP M10 ENGINE 115 KW PULL/PULL 7,000 daN TORQUE 1,500 daNm 2,200 daNm 3,200 daNm 1,000 daNm STROKE 1,65 - 2,65 - 3,65 m WHEEL RANGE 240- 440 mm WEIGHT 9,500 kg - 10,100 kg Thanks to the adoption of numerous innov...
Osimo, Italy
MAIT MP M16
- Manufacturer: Mait
- Model: MP-M16
MP M16 ENGINE 127 KW - 160 KW PULL/PULL 10,000 / 12,000 daN TORQUE 15-23-32 KNm STROKE 1,65 - 2,65 - 3,65 BORE RANGE 240-355 mm WEIGHT 16,500 - 19,000 kg Thanks to the adoption of numerous innovative technical so...
Osimo, Italy
MAIT HR 120
- Manufacturer: Mait
- Model: HR120
- Hours: 120 hour
HR 120 ENGINE 129 KW COPPER 120 kNm PULL/PUSH (CP VERSION) 150/160** kN - 120/140**kN STROKE (CP VERSION) 2,500 / 4,300* mm MAIN WINCH 120 Kn MAX DIAMETER 450 - 1,300 mm MAX DEPTH 35 - 40 - 42 m WEIGHT 30 - 34 to...
Osimo, Italy
Trusted Seller
2023 Nostra Azienda PJ20_1500
- Manufacturer: Nostra Azienda
N°1 brand new drilling machine, PROEJCT brand, model PJ20_1500 installed on a used truck (or alternatively new) 3 axles 6x6 Doosan brand auxiliary engine, 6 cylinders, water cooled, power 290 hp - engine Model P...
Fidenza, Italy