Building Filters
Felder D963 Thicknesser
- Manufacturer: Felder
Max. planing width: 630mm | Max. planing height: 300mm | Shaft: spiral, two turns | Lifting: electric with reading | Speed regulation: smooth | Engine: 7.3KW
$4,120 USDLwówek, PolandExtractor Felder RL 250
- Manufacturer: Felder
Extractor Felder RL 250 capacity 6200 m3/h dust outlet 250mm chip container capacity 500L fire suppression installation with water connection motor 5.5KW weight 750kg condition very good
Felder D963 Thicknesser
- Manufacturer: Felder
Planer Felder D963 Max. planing width: 630 mm, Planing height from 3-300 mm Spiral shaft, electrical lifting with readout, Feed with adjustable speed from 4-16 m/min, 3 upper feed rollers Motor 7.3KW, electric br...
Felder G360 Edgebander
- Manufacturer: Felder
Feed: 7m/min | Total power demand for electricity: 2,8KW | Edge thickness: 0.4mm-3mm | Maximum plate height: 45mm | Pre-milling cutters: Yes | Applying glue: With a roller
Felder AD 741 planer-thicknesser
- Manufacturer: Felder
Felder AD 741 planer-thicknesser Spiral shaft Main motor 4KW, Planer-thicknesser table length 2000mm, Planing width 410mm, Thicknessing height 230mm, 1 feed speed, manual adjustment of thicknesser table with digi...
Felder A951L Planer
- Manufacturer: Felder
Felder A951L planer Max. planing width: 510 mm, Table length 2700mm Spiral roller, manual feed table lifting with reading Motor 5.5KW, electric brake machine in very good condition, still with original knives sin...
Slotting machine Felder F 700 Z
- Manufacturer: Felder
Slotting machine Felder F 700 Z moving trolley in the table 205 cm, spindle adjustable up-down and at 0-45 degrees spindle Ø 30 interchangeable, motor 7.3 kW, electric brake left-right rotation 4 speed settings V...
Planer Format 4 Felder Plan 51L
- Manufacturer: Felder
Planer Format 4 Felder Plan 51L, Table tops 300 cm, Planing width 51 cm, Spiral knife roller, Electrical control of the feed table of the planer, Feed table manually adjustable concave-convex, Tilting adjustable ...
Felder K700 S Panel Saw
- Manufacturer: Felder
Felder K700 S Cart 280cm 0-45 degrees electronically adjustable tilt Top-bottom electronically adjustable Gullet 0.65KW
Wide belt grinder Felder FW 1102 C
- Manufacturer: Felder
WIDE BELT GRINDER Felder FW 1102 C grinding width 1100 MM, grinding height 3-170mm 1 unit with calibration rubber shaft with hardness 85, Second unit combined with rubber shaft + grinding foot with smooth pressur...
Felder K500S panel saw
- Manufacturer: Felder
Felder K500s sliding table saw with carriage The length of the trolley: 250 cm | Has an undercutter: Yes | Engine size: 4 KW | Engine size undercutter: 0,75 KW | Up-down adjustment: Yes, manual | 0-45° adjustment...
Low long spindle milling machine Felder F 700 M
- Manufacturer: Felder
Felder F 700 M vertical spindle milling machine Electric up-down spindle regulation and manual angle adjustment from 0 to +45 degrees spindle chuck Ø30 interchangeable long beds 215cm 4 spindle speeds 5.5KW motor...
Felder Format 4 HVP PL90 Side Press
- Manufacturer: Felder
Felder Format 4 HVP PL90 desk length 300cm width 130cm shelves very nice aluminum hot water heating, machine has own circulation possibility to connect to external piston diameter 70mm, 6 pistons safety switch – ...
Felder kappa 550 format saw for cutting format 4
- Manufacturer: Felder
Felder kappa 550 format saw for cutting format 4 cart 320cm, tilt and up-down blade motorized adjustment, dutch right side adjustable motorized up to 1600mm, main motor 7.35KW, Max blade 500mm machine used, condi...
Cross-cut Saw Felder kappa 400 format 4
- Manufacturer: Felder
Cross-cut Saw Felder kappa 400 format 4 carriage 320cm, tilting and up-down saw blade electrically adjustable culage on the right side manually adjustable up to 1250mm, kerf 1.1KW, main motor 7.3KW, 3 cutting spe...
