Building Filters
- Trusted Seller
CARLSON 33.8 Sqm
- Manufacturer: Carlson
Used Carlson stainless steel plate & frame filter press. Unit has (54) stainless steel perforated plates which measure approximately 560mm x 560mm giving a total filtration area of 33.8sqmt. Unit has (52) stainle...
Hainesport, NJ - Trusted Seller

Rosenmund and Cogiem Filter 6 m² (64.6 ft²) Stainless Steel 316 - IPP# 92659
- Manufacturer: Rosenmund
Filter volume 7200 liters Hydraulic agitator lift driven by 0.75 KW, 3/50/500 volt motor. Hydraulic agitator lift driven by 0.75 KW, 3/50/500 volt motor. Packing gland on shaft
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 5 m² (53.8 ft²) Stainless Steel 316 - IPP# 38873
- Manufacturer: Schenk
pressure leaf filter body Discharge type: centrifugal Tank capacity: 350 litres Serial number: KH839 Int rated 6 bar/full vac @ 200 deg C Unit will take (10) leaves Vessel is 900mm (36"). No leaves w/unit.
Princeton Junction, NJ - Trusted Seller

Stainless Steel 316 Chemap AG (Swiss) Pressure Leaf Filter - IPP# 800276
- Manufacturer: Chemap AG (Swiss)
design pressure 5.69 bar @ -29/+60 deg C Shaft seal: Packed gland built to ASME V111 div 1
Princeton Junction, NJ - Trusted Seller

Hastelloy - C22 Clad Rosenmund FML 250 Rosenmund and Cogiem Filter - IPP# 706865
- Manufacturer: Rosenmund
Agitated jacketed Rosenmund filter dryer Batch size 20 to 25kg internal design pressure 0.39 MPa (3.9 bar) + vacuum @ -20/170 degrees C (120 liter) coil jackets 0.6 MPa (6 bar) @ -20/170 degrees C (10 liter) inte...
Princeton Junction, NJ - Trusted Seller

Stainless Steel 316 Chemap AG (Swiss) Pressure Leaf Filter - IPP# 800278
- Manufacturer: Chemap AG (Swiss)
5.69 bar @ -29/+60 deg C packed gland on shaft, built to ASME V111 div 1
Princeton Junction, NJ - Trusted Seller

Stainless Steel 316 Chemap AG (Swiss) Pressure Leaf Filter - IPP# 800277
- Manufacturer: Chemap AG (Swiss)
5.69 bar @ -29/+60 deg C packed gland on shaft built to ASME V111 div 1
Princeton Junction, NJ - Trusted Seller

Pressure Leaf (Funda) Filter Stainless Steel 304 Chemap A10 - IPP# 89349
- Manufacturer: Chemap
Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 6 m² (65 ft²) Stainless Steel 316 - IPP# 94604
- Manufacturer: Artisan
continuous filter/washer Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each st...
Princeton Junction, NJ - Trusted Seller

Stainless Steel 316 Bachiller FNB 06S Rosenmund and Cogiem Filter - IPP# 236190
- Manufacturer: Bachiller
internals and shaft are highly polished 316 stainless steel Registration number: 1884 ATEX, II2G EEx de IIC T4 motor via a reduction gearbox, internal bellows on shaft shaft with rotary union joint agitator drive...
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 28.8 m² (310 ft²) Stainless Steel 304 - IPP# 92822
- Manufacturer: Schenk
Horizontal plate design Centrifugal discharge driven by 40 HP, 3/60/230/460 volt, 1775 rpm motor thru Falk gearbox input 1750, ratio 6.246:1, output 290
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 15 m² (161.5 ft²) Stainless Steel 316 - IPP# 703043
- Manufacturer: Chemap Ag (Switzerland)
Test pressure: 11.9 bar centrifugal discharge Total capacity 539 gals (448 Imperial gals) Unit has (20) 39" diameter discs Type A for wet cake discharge.
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217842
- Manufacturer: Schenk/Germany
Vessel #: 5292GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter centrifugal discharge. Cake capacity 0.45 cubic feet
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217843
- Manufacturer: Schenk
vessel # 5293GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter, vertical jacketed centrifugal discharge. Cake capacity 0.45 cubic feet.
Princeton Junction, NJ - Trusted Seller

Pressure Leaf Filter 39.6 m² (426.3 ft²) Stainless Steel 316 - IPP# 107492
- Manufacturer: Seitz Werke (Germany)
1.4401/1.4571 (316SS/316SS/TI) horizontal tank Rated 4 ATU @ 120 degree C Filter housing retracts on an overhead rail for cleaning the filter (1) clamped head with ratchet closure Equipped with (30) leaves Filter...
Princeton Junction, NJ
