Used Processing in Washington, USA

NEW 6'w x 6'h x 6'l BATCH OVEN - $37,443.00

• new

• Manufacturer: Oven Empire Mfg.

[FINANCING AVAILABLE - CLICK HERE](https://www.stearnsbank.com/med-calc) 6'w X 6'h X 6'l Batch Oven by Oven Empire Manufacturing designed for curing at 250 to 450 degrees F. Industrial Oven with Double Doors on...

DIVERSITECH DD 3 X 4 DOWNDRAFT TABLE - Made to Order

• new

• Manufacturer: Diversitech

Made to Order DMT offers sales in Washington, Oregon, Idaho, Northern California, Northern Nevada and Montana on Diversitech Wet Downdraft Table DIVERSITECH DD 3 X 4 DOWNDRAFT TABLE This self-contained DD 3×4 dow...

U14765 Lockformer Corner Caddy

• used

• Manufacturer: Lockformer

Duro Dyne MF12

• new

• Manufacturer: Duro Dyne

MF has been the standard for entry level “through insulation” welders for over 30 years. Proven performance and high reliability have made the MF a “Must Have” for any sheet metal shop which does occasional insul...

Duro Dyne RH Mach 70 Rolling Head Automatic Pinspotter

• new

• Manufacturer: Duro Dyne

The Platinum Edition RH Mach 70 Pinspotter features a more efficient transformer that provides a wider range of welding capabilities. The Heavy Duty Vibrator Bowl and base weld pins up to 2’’, and the optional ma...

Duro Dyne PBF-510

• new

• Manufacturer: Duro Dyne

Duro Dyne PBF 510 Pinspotter Duro Dyne is proud to introduce the next generation of portable insulation fastening equipment. Built upon the highly successful PBF pinspotter concept, the PBF-510 delivers more powe...

(3) x 1,500g Variable Capacity Tanks | CHP1

• used

Price Is Per Tank Dimensions: 72"D x 10'H | Ground clearance: 30" | Doors: Rectangle bottom door 17.5"W x 21.5"H, Oval racking door 18"W x 14"H | Racking port: 2" | Drain port: 2" | Sample valve: Yes | Thermowell...

U14643C Namcor Striker HDX square to round machine

• used

• Manufacturer: Namcor

ITEM: 14643C MODEL: HDX LOCATION: Kent WA. All you need is shop air to quicky make square to round transitions.

U14374C Duro Dyne FG1 PinSpotter

• used

• Manufacturer: Duro Dyne

Pin spotter ITEM : 14374C MODEL : FG1 SERIAL #: 8295 This item is located in Kent, WA.

Roper Whitney #544

• used

• Manufacturer: Roper Whitney

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #13619

RAMS RAMS-2004

• new

• Manufacturer: Rams

Capacity: 24 gauge Dimensions: 9″ x 9″ x 31″ Weight: ~70 lbs MODEL : RAMS-2004 A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without setup or adjustment. The upp...

RAMS NRAM2004

• new

• Manufacturer: Rams

Rams 2005 cheek bender MODEL : RAMS-2005 This 24 inch machine is bench mounted with Torrington Needle bearings as well as a roller guide end plate. This will give a consistent bend all along the length of the pie...

U14293 Engel Powered Cleat Bender

• used

• Manufacturer: Engel

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #U14293 Powered Cleat Bender Great Condition Forms a modified tear drop hem on 36 inches of 20 gauge. ...

U14314 Cleat Bender 24″

• used

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #U14314 24″ Cleat Bender Excellent Condition

Heat Exchange Coil for Chiller

• used

This is an unused custom-made water-cooled heat exchange coil for chiller in like new condition. Dimensions are approximately: 2 ft x 10 ft x 3 ft and Weighs 1,050 pounds. All items are sold as is. We do not make...