Used Electrical Test Instruments in Dublin, Ireland

emtest UCS200N
- used
- Manufacturer: emtest
Details EMTEST UCS200N / EM Test UCS 200N The EM Test UCS 200N Ultra-Compact Simulator for Automotive Transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling...
Dublin, Ireland
Haefely PIM120
- used
- Manufacturer: Haefely
Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...
Dublin, Ireland
Haefely PCD120
- used
- Manufacturer: Haefely
Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...
Dublin, Ireland
EMC Partner TRA2000
- used
- Manufacturer: EMC
Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...
Dublin, Ireland
Haefely PIM100
- used
- Manufacturer: Haefely
Details Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power line...
Dublin, Ireland
emtest UCS500N5
- used
- Manufacturer: emtest
Details emtest UCS500N5 The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic sta...
Dublin, Ireland
Haefely PSURGE 8000
- used
- Manufacturer: Haefely
Details RENT Haefely PSURGE 8000 (call for availability) The Haefely PSURGE 8000 Surge Platform Test System is a modular expandable system that grows with your application needs. The modular concept is built arou...
Dublin, Ireland
EMCO 3810/2
- used
- Manufacturer: Emco
Details Emco 3810/2 The Emco 3810/2 Line Impedance Stabilization Network is a twochannel low pass filter network designed to isolate the equipment under test from an external power source while steering any radio...
Dublin, Ireland
Teseq (Schaffner) NSG3060A
- used
- Manufacturer: Teseq - Schaffner
Details TESEQ NSG3060A Multifunction Conducted Immunity Surge Generator Teseq’s new NSG 3060A conducted immunity generator takes the proven, user-friendly design of the highly successful NSG 3000 series to a new ...
Dublin, Ireland
Rohde & Schwarz ESR7
- used
- Manufacturer: Rohde & Schwarz
- Model: ESR
Details RENT R&S ESR7 (call for availability) The R&S ESR7 EMI Test Receiver is a dual instrument that measures electromagnetic disturbances while simultaneously functioning as a fully featured, powerful signal a...
Dublin, Ireland
Emco 3816/2 SH
- used
- Manufacturer: Emco
Details The Emco 3816/2 SH single-phase Line Impedance Stabilization Network (LISN) covers 9 kHz to 30 MHz with a 16 A continuous current rating, featuring two lines (L+N) plus ground, Shuko connectors, a switche...
Dublin, Ireland
EMCO 3115
- used
- Manufacturer: Emco
Details EMCO 3115 The Emco 3115 Antenna (double ridged guide) is a linearly polarised broadband antenna with excellent gain and good VSWR characteristics. The frequency range is 1 GHz to 18 GHz. The Emco 3115 was...
Dublin, Ireland
Chroma 63303A
- used
- Manufacturer: Chroma
Details Chroma 63303A DC Electronic Load Module The Chroma Model 6330A series high speed DC electronic load improves CPU clock, baud rate, parser and added synchronic parallel function for fast operation. Each lo...
Dublin, Ireland
Haefely PCD130
- used
- Manufacturer: Haefely
Details Haefely PCD130 The Haefely PCD130 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations...
Dublin, Ireland
Solar 7399-3
- used
Details SOLAR 7399-3 Spike Generator The Solar Model 7399-3 Spike Generator is capable of providing high energy spikes with amplitudes adjustable up to 2500 V peak into low impedance loads, as required in MIL-STD...
Dublin, Ireland