Fluke 415B
- Manufacturer: Fluke
- Model: 415B
The Model 415B High Voltage Power Supply is a stable well regulated source of dc voltage. The Model 415B is capable of providing 0 to 3100 volts dc and 0 to 30 milliamperes current. The output voltage is adjusabl...
Farmingdale, NJ
Fluke 409A
- Manufacturer: Fluke
- Model: 409A
The 409A High Voltage Power Supply provides high calibration accuracy, tight line-load regulation, fine voltage resolution, excellent long term stability, low temperature coefficient plus freedom from corona, jit...
Farmingdale, NJ
Fluke 6060A
- Manufacturer: Fluke
- Model: 6060A
Synthesized Signal Generator , 10 KHz to 520 MHz. -127 to +13 dBm
$901 USDFarmingdale, NJ
Fluke 4265A
- Manufacturer: Fluke
- Model: 4265A
The Model 4265A is a Programmable, bipolar dc voltage source. Output voltage is from 0 to 65.532 vdc in two ranges; 16 and 65 vdc. Programming resolution using the internal reference voltage is 1 mv on the 16 vol...
$1,045 USDFarmingdale, NJ
Fluke 405B
- Manufacturer: Fluke
- Model: 405B
The Fluke Model 405B is a High Voltage DC Power Supply having the capability of providing an output of 0 to 3100 VDC, and 0 to 30 milliamperes. The power supply reference voltage is obtained from a temperature co...
Farmingdale, NJ
Fluke 4265A-03-06
- Manufacturer: Fluke
External Reference Option (-03) Output may be ac as well as dc. And, with Option -03, you have the ability to amplify or attenuate, by digital control, either an ac or dc voltage supplied by an external source, O...
Farmingdale, NJ
Fluke 4210A
- Manufacturer: Fluke
- Model: 4210A
- Voltage: 9,999 V
The Model 4210A is a programmable bipolar dc voltage source. The output voltage range is from 0 to 16.665 vdc and is available in 1 mv increments. Output accuracy is 0.01% of the programmed level, after a 30 usec...
Farmingdale, NJ
Fluke 410B
- Manufacturer: Fluke
- Model: 410B
HIGH VOLTAGE POWER SUPPLY 10KV Cal: Calibration Available | As-is: Unit Sold AS-IS
$2,095 USDFarmingdale, NJ
Fluke 335D
- Manufacturer: Fluke
- Model: 335D
DC Voltage Standard As-is: Unit Sold AS-IS | Cal: Calibration Available
$1,997 USDFarmingdale, NJ
$525 USDFarmingdale, NJ- Trusted Seller
Fluke 410B
- Manufacturer: Fluke
- Model: 410B
10 kVolt / 10 mAmp / 100 W High Voltage DC Power Supply The Fluke 410B High Voltage DC Power Supply is an extremely stable source which has an output voltage of 0 to 10,000 Volts DC and an output current of 0 to ...
Cary, NC 
Fluke 103A
- Manufacturer: Fluke
The Model 103A now makes possible the comparison of test and reference frequencies from 100 kHz to 1 MHz in 100 kHz steps and from 1 MHz to 5 MHz in 1 MHz steps. Output may be read directly on frequency counter, ...
Farmingdale, NJ
Fluke PM2812
- Manufacturer: Fluke
- Model: PM2812
This Dual Power Supply meets the need of system builders and stand alone bench top use. These supplies are compact, taking up only two engineering units of high. The front panel provides full access to all instru...
Webster, MA
Fluke PM2832
- Manufacturer: Fluke
- Model: PM2832
Details The Fluke PM‑2832 is a benchtop programmable DC power source with two isolated outputs, each delivering up to 60 V and 2 A, totaling 240 W. It features precise regulation, stable output, and GPIB/IEEE‑488...
Dublin, IrelandFluke 410B
- Manufacturer: Fluke
- Model: 410B
This Calibrator is an extremely stable source which has an output voltage of 0 to ± 10,000VDC and an output current of 0 to 10mA. Voltage is set with four decade switches and a vernier potentiometer. Output polar...
Webster, MA
Tip: Enter manufacturer, model or keyword