Used controller in Bavaria, Germany

Fill level control

• Manufacturer: vbw-weihenstephan

Additional title: Fill level inspection | Nominal capacity of filler: 50000 b/h

Label and fill level control

• Manufacturer: Heuft

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft...

5,000 liter RIEGER mash immersion tank / full immersion tank with overflushing device and sieve cylinder with cooling jacket and control in V2A 21-0045EUBA 21-0045EUBA

Cat. no.: 21-0045EUBA Condition: Used Piece: 1 RIEGER mash dipping tank 5.000 liter, full immersion tank with flushing device and sieve cylinder with cooling jacket and control in V2A Dimensions: Total height: 48...

Bottle filling line for disposable bottles

Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambl...

Blending apparatus

• Manufacturer: Albert Handtmann Holding GmbH & Co. KG / Esau und Hueber

This mixing plant from Albert Handtmann Holding GmbH & Co. KG / Esau and Hueber is designed for the precise and efficient mixing of liquids. The plant is equipped with four mixing lanterns and a control cabinet m...

3-vessel brewhouse

• Manufacturer: Joh. Albrecht

3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system | Brew size: 2000 l | Length: 2600 mm | Width: 5000 mm | Height: 4500 mm | Operation / control: Manual control with heati...

5-vessel-brewhouse

• Manufacturer: Huppmann

5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle wit...

empty bottle inspector

• Manufacturer: Heuft

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in ...

Blending plant

• Manufacturer: Diessel

Diessel blending plant for 180 hl/h with 2 IDM, on stainless steel frame

Premix system

• Manufacturer: Ortmann+Herbst

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated wat...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

Wort aeration

• Manufacturer: Turbo Air

Turbo Air Wort aeration DN40 mounted on frame, mobile

2011 CFS Buehl GmbH OME.0000

• Manufacturer: CFS/Koppens

CFS formatter The machine is used as a component in a in a line for cutting, sizing and and packaging of food products. It fulfills two functions: - In the sizer, individual In the formatter, incoming portions ar...

blending apparatus

• Manufacturer: Esau & Hueber

Air-controlled cellar unit of the "DUOMAT" type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic...