Building Filters
HUGHES WILLIAMS LLDH MODEL 1000-DOH DRILL RIG #2940Tb
- Manufacturer: Hughes
Manufactured 1974, Fully refurbished, 80’ depth, 5” inner kelly, 7” outer kelly, John Deere 6068 6 cyl engine, 30 ton Pullmaster main winch, 12,000# service winch, air clutches, Joy sticks for travel and turn, mo...
CARDWELL KB750 DRILL RIG #3982T
- Manufacturer: Cardwell
Rated 8,500’ with 4-1/2” drill pipe, (1) Detroit 60 engine 14L 650hp, Cardwell 112’ x 300,000# mast, Century 17-1/2” x 44” rotary tble, Ideco 160 ton Block, King 150 ton swivel, Regan 10” 3000 psi annular BOP, tr...
WILSON MOGUL 42 DRILL RIG #2750T
- Manufacturer: Wilson
96’ x 150,000# telescoping derrick, 300,000# hook load capacity. Substructure 10.8’ height (casing pulling), 14’ (drilling/workover), 225,000lb load capacity (workover) or 400,000# (drilling). Cat 3406 diesel eng...
Oceanside, NY
1973 PORTADRILL 10TL TOP HEAD DRIVE DRILL RIG #2916Tb
- Manufacturer: Portadrill
Manufactured 1973, top drive updated to a Foremost 5000 ft/lb torque head, standard 36’ mast can pull 30’ rods, but only makes connections with 20’ pipe, 3” plumbing, 2-1/2” swivel hose, 3 x 4 Mission mud pump, n...
Oceanside, NY- Trusted Seller
2025 SULLIVAN PALATEK D375PHKR -STOCK# 4236
- Manufacturer: Sullivan - Palatek
- Model: D375
- Horsepower: 134 hp
- Free air delivery: 375 CFM
New D375 PHKR Powered by Kohler KDI1304 Tier IV Final 134H.P. Call For Pricing
Louisville, KY - Trusted Seller
2022 Furukawa HCR1450ED-II
- Manufacturer: Furukawa
- Model: HCR1450EDII
- Horsepower: 260 hp
- Machine weight: 16,460 kg
1,077 Hours Drifter resealed over the summer HD828S drifter Currently working in the field. Excellent condition
- Trusted Seller
2019 Furukawa HCR1450-EDII
- Manufacturer: Furukawa
- Model: HCR1450EDII
- Horsepower: 260 hp
- Machine weight: 16,460 kg
31 hours on new engine Approx. 4000 total frame hours & 1,621 percussion hours HD828S drifter Currently set up for T51 Excellent condition
- Trusted Seller
2005 Tamrock Pantera 1500
- Manufacturer: Tamrock
- Model: Pantera 1500
- Horsepower: 350 hp
- Drilling depth: 6.1 m
21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age
- Trusted Seller
2011 Furukawa HCR1200EDII Stock# 3424
- Manufacturer: Furukawa
- Model: HCR1200EDII
- Machine weight: 14,830 kg
– Engine Hours 9,741 – Percussion / Impact Hours: 4,470 – Engine said to have been overhauled at 7,115 hours
Louisville, KY - Trusted Seller
2013 Furukawa HCR1500EDII Stock# 4241
- Manufacturer: Furukawa
- Model: HCR1500EDII
- Horsepower: 348 hp
- Machine weight: 249.93 kg
– Total Hours 6,690 – Percussion / Impact Hours: 2,322 – Very well maintained
Louisville, KY - Trusted Seller
2007 Furukawa HCR900ES-20
- Manufacturer: Furukawa
- Model: HCR900ES
- Horsepower: 225 hp
- Machine weight: 202 kg
– Work ready machine – Caterpillar Diesel Engine Model 3126
Louisville, KY - Trusted Seller
2003 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Comes with YH70, not currently installed but will be mounted for transport – Batteries need charging or replaced so could not stand machine up at time of photos. – Missing wall and doors need to be reattached –...
- Trusted Seller
1999 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A Drifter -Only known issue is the engine Boggs down under a hydraulic pressure load everything works as intended but noticeable lack of performance due to lower engine rpm’s . Possible fuel i...
- Trusted Seller
2005 Atlas Copco ROC D7-11
- Manufacturer: Atlas-Copco
- Model: ROC D7-11
- Horsepower: 225 hp
- Drilling depth: 28 m
– 12,000 engine hours – 4,167 percussion hours – Setup for T45 – COP1840 Drifter
- Trusted Seller
2000 Ingersoll Rand ECM490
- Manufacturer: Ingersoll Rand
- Model: ECM-490
- Horsepower: 250 hp
- Drill Pipe Diameter: 3,050 mm
– Cummins 6CT8.3 – Tier 2 – 200CFM/140PSI Air – YH70 Drifter – Setup for T38 – 12,667 engine hours – Drifter Rebuild @ 12,518 Hours – New feed chain & sprockets @ 12,348 hours – 1,000 hour service done @ 12,667 h...
Louisville, KY 
Tamrock Pantera 900 Drilling Rig
- Manufacturer: Tamrock
- Model: Pantera 900
Good condition Tamrock Pantera 900 Drilling Rigs available between 1998 and 2005 years. Located in USA and other countries. Click request price for more information.
USA