Machine Tools » Forging Presses

Search By Manufacturer

Search By Country

Building Filters

1814

Used Forging Presses

  • Trusted Seller
    2008 2,500 ton SeoNam Oil

    2008 2,500 ton SeoNam Oil Hyd 4-Column push down

    • Manufacturer: Seo Nam

    Force: 2,500 tonnes | Hydraulics: Oil | Stroke: 1,500 mm | Daylight: 3,400 mm | Table l-r: 6,000 mm | Table f-b: 2,200 mm | Press action: Push Down | Number of columns: 4 | Forging speed: 67 mm/sec | Ram advanci...

    Rockville Centre, NY
  • Trusted Seller
    1985 1,600 ton Spiertz HPS

    1985 1,600 ton Spiertz HPS 1600 - 2500/2000 Long Stroke

    • Manufacturer: Spiertz

    Additional information: Hydraulic Tank capacity is 6,000 liters Available for immediate inspection and delivery Still installed and under power for inspection Exceptionally fine condition

    Rockville Centre, NY
  • Trusted Seller
    2008 3,000 ton Open Die,

    2008 3,000 ton Open Die, 4 column push down, stroke 2000mm,

    • Manufacturer: Korean Built

    Force: 3,000 tonnes | Hydraulics: Oil | Stroke: 2,000 mm | Daylight: 4,000 mm | Table l-r: 2,000 mm | Table f-b: 4,000 mm | Upsetting tonnage: 3,500 tonnes | Press action: Push Down | Number of columns: 4 | Dist...

    Rockville Centre, NY
  • Trusted Seller
    1971 1,500 ton Hitachi Wide

    1971 1,500 ton Hitachi Wide Bed

    • Manufacturer: Hitachi

    Additional info: · Moving Bolster: Front bolster type · Straight side type · Maximum oil pressure: 200kg / cm2 5) · Bed opening: 3550mmx2100mm · Finned plate area: 3540mmx2090mm · Slide ar...

    Rockville Centre, NY
  • Trusted Seller
    3,600 ton Schüler model

    3,600 ton Schüler model

    • Manufacturer: Schuler

    Electrical System Lubrication System Tonnage: 3,600 tonnes | Stroke: 200 mm | Shut height: 600 mm | Slide l-to-r: 1,220 mm | Slide f-to-b: 915 mm | Spm: 15 | Bed l-to-r: 1,400 mm | Bed f-to-b: 1,220 mm | Distance...

    Rockville Centre, NY
  • Trusted Seller
    1990 10,000 ton 4-Column 3-Cylinder

    1990 10,000 ton 4-Column 3-Cylinder

    • Manufacturer: UralMash

    Additional Specifications are available on request. Available for immediate inspection and delivery Still installed but removed from power

    Rockville Centre, NY
  • Trusted Seller
    1994 1,500 ton Ssangyong

    1994 1,500 ton Ssangyong

    • Manufacturer: Ssangyong

    Very good working condition Available for immediate inspection and delivery

    Rockville Centre, NY
  • Trusted Seller
    4,000 ton Ultra Wide Bed

    4,000 ton Ultra Wide Bed China Built 16-Column 4-Cylinder

    • Manufacturer: China Built

    Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

    Rockville Centre, NY
  • Trusted Seller
    1970 4,000 ton Uralmash CCP3

    1970 4,000 ton Uralmash CCP3 Y3TM 4-Column Hydraulic

    • Manufacturer: Uralmash

    Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

    Rockville Centre, NY
  • Trusted Seller
    1980 5,000 ton CIM-Tech CIM-5000

    1980 5,000 ton CIM-Tech CIM-5000 / CIM-25

    • Manufacturer: CIM-Tech

    Additional info: CIM-Tech Automatic Manipulator CIM MP25 as follows : Force - 25 tons Max diameter - 6,000mm (236") Min diameter - 1,900mm (75") Height: approx 1,900mm (75") Rotation speed: 10 to 15 rpm Manipulat...

    Rockville Centre, NY
  • Trusted Seller
    1960 5000 ton Bliss model

    1960 5000 ton Bliss model HS-5000-4R-7-204 Single

    • Manufacturer: Bliss

    Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

    Rockville Centre, NY
  • Trusted Seller
    1942 ACME HILL XN

    1942 ACME HILL XN

    • Manufacturer: Acme
    • Model: XN

    Die depth: 22" | Die width: 14" | Die length: 19-1/4" | Die opening: 5" | Tool holder pocket width: 5" | Stock gather: 7-5/8" | Hold: 2" | Stroke: 12" | Header slide length: 80" | Hp: 30 | Forging pressure: 630 ...

    Ivyland, PA
  • Trusted Seller
    Nedschroef Model NH416 4 Die

    Nedschroef Model NH416 4 Die Progressive Header

    • Manufacturer: Nedschroef

    Maximum bolt diameter: 16mm | Maximum bolt length: 140mm | Maximum cutoff length: 170mm | Die diameter (maximum): 90mm | Die length: 165mm | Kickout length pko: 38mm | Forging load: 1500 KN | Maximum cutoff diam...

    Ivyland, PA
  • Trusted Seller
    2006 JERN YAO JNFP 14B5S

    2006 JERN YAO JNFP 14B5S

    • Manufacturer: JERN YAO

    Max. cut-off dia.: 14 millimeters | Max. cut-off length: 13 millimeters | Maximum kickout: 15mm | Maximum pko stroke: 8mm | Maximum production: 280 PPM | Electrics: 30 HP ACVD Motor and Controls | Approx. weigh...

    Ivyland, PA
  • Trusted Seller
    1972 ASAHI OKUMA ORH 120

    1972 ASAHI OKUMA ORH 120

    • Manufacturer: Okuma

    Maximum cutoff length of wire: 130mm ( 4" ) | Maximum kickout length 1st die: 130mm ( 5" ) | Maximum kickout length 2nd die: 90mm ( 3-9/16" ) | Die hole diameter 1st die: 65mm ( 2% ) | Die hole diameter 2nd ...

    Ivyland, PA
  • no-image_en.png

    Komatsu MKN600 Forging Press

    • Manufacturer: Komatsu
    • Model: MKN600

    Good condition Komatsu MKN600 Forging Presses manufactured in 1983. Located in USA and other countries. Click request price for more information.

    Europe
678910

Overview

Forging presses are powerful machines used to shape metal by applying compressive force. They are essential in manufacturing industries for producing parts with high strength and durability. These presses come in various types, including hydraulic and mechanical, catering to different production needs and metalworking processes.

FAQ

What factors should I consider when buying a used forging press?

Consider the press's tonnage capacity, type (hydraulic or mechanical), age, and overall condition. Review the maintenance history and check for any signs of wear or damage.

How can I ensure safe shipping of a forging press?

Use a specialized heavy machinery transport service. Ensure the press is properly secured and protected during transit to prevent any damage.

What maintenance does a forging press require?

Regular maintenance includes checking and replacing hydraulic fluids, inspecting mechanical components for wear, and ensuring all moving parts are well-lubricated. Follow the manufacturer's maintenance schedule for detailed guidelines.