Used controller in st

2020 CARER R45H2 AGV SPED 9,920 lbs capacity Remote controlled

• Manufacturer: Carer

Lift tons: 4.1 tonnes

1996 PH OGF-50 #1112425

• Manufacturer: PH

15" STROKE 34" DAYLIGHT 30" X 27" BED 5.29" DIAMETER RAM END 100 GALLON RESERVOIR PALM BUTTONS ALLEN BRADLEY CONTROLLS 1990 MAX PSI YEAR 1997 8" CYLINDER BORE SPEEDS: ADVANCE 80 IPM RETURN 151 IPM EQUIPPED W: JOG...

2,800mm Banning RWW H120/V100 CNC

• Manufacturer: Banning

Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...

1,000 ton Etchells model MF40/1000 S.P.H. Vertical

• Manufacturer: Etchells

Additional info: • Four (4) Tie-Rod Construction • Horizontally opposed griping dies • Multi-Directional adjustment by wedges • Flat-Base Construction • Overload protection • Adjustable front stock gauging device...

National #6

• Manufacturer: National

Equipped With * AIR CLUTCH * AIR BRAKE * CONTROLS MAXIMUM LENGTH OF ROLLED SECTION: 24"

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

2015 5/8" x 5" National HS LS-DSSD Warm Header

Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...

CYLINDER FORGING MANUFACTURING LINE

• CYLINDER FORGING MANUFACTURING LINE • 2016 AJAX TOCCO POWER ZONE INDUCTION HEATER – COMPLETE SYSTEM WITH FIVE COILS ON FOUR INDEPENDENT ZONES, MATERIAL FEEDER SYSTEM, FEED SYSTEM HYDRAULICS, PLCS AND DEDICATED ...

K.H. HUPPERT 2,000°F ELECTRIC FURNANCE

USED "K.H. HUPPERT CO." ELECTRIC FURNACE STYLE 2304 PC OT TYPE ST SERIAL # 439 VOLTS 208 AMPS 17 OVEN DIMS. 10" W x 11" H x 19" DEEP TEMPERATURE RANGE 300°F TO 2,000°F POWER 6 Kw WEIGHT 350 LBS. (APPROX.) EQUIP...

HYODONG 36mm

• Manufacturer: HYODONG

Equipped With Specifications: Features: MACHINE FEATURES/TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and p...

HYODONG Nut Former

• Manufacturer: HYODONG

Equipped With Specifications: Features: EXAMPLES OF TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and punch ...

Manipulator Lamberton

• Manufacturer: Lamberton

1/2 Ton Lamberton 5-Axis Hydraulic Forging Manipulator Capacity : 0.5 tons, Max. Reach : 173" (14'5"), Hydraulic Reservoir Capacity : N/A, Equipped With : Completely enclosed, climate controlled cab Skid-mo...

Upsetter Chambersburg 8MP

• Manufacturer: Chambersburg

Blow force : 8,000 lbs Bore diameter : 450 mm Stroke : 200 mm, Daylight between dies : 250 to 375 mm, Die area : 475 x 500 mm, Blows per minute : 140 max Intake : 100 mm, Exhaust (each end) : 100 mm Guide...

Part Former Cold Sakamura BPF540

• Manufacturer: Sakamura
• Model: BPF540

Parts Formers, 5 Die Maximum Wire Diameter: 23 mm, Maximum Cutoff Length: 175 mm, Maximum Kickout Length: 130 mm, Pieces per Minute: 86-130, Forging Tonnage: 2200 Kn, Electrics: AC Motor and Controls, Equi...

2" Upsetter Ajax

• Manufacturer: Ajax

2 inch, Capacity : 400 tons, Stroke : 225 mm, Stroke per minutes : 55, Hold : 62.5 mm, Stock gather : 150 mm, Die grip rating : 248 tons, Die Opening : 87.5 tons, Die height : 350 mm, Weight : 19.5 tons....