Used Forging

5" Upsetter National

• Manufacturer: National

5" Upsetter, Capacity : 1100 tons, Stroke of header : 337 mm, Gather : 225 mm, Die opening : 150 mm, Die height : 662 mm, Die width (each die) : 187 mm, Die length : 341 mm maximum, Stroke per minute : 35...

Upsetter Ajax

• Manufacturer: Ajax

4" Upsetter Maximum Diameter : 4” Capacity : 800 tons, Strokes Per Minute : 35 Die Height : 650 mm, Die Width : 200 mm, Length of Die Seat : 525 mm, Die and Tool Space : 1175 mm, Die Opening: 150 mm, Sto...

Upsetter Hasenclever WSHK100

• Manufacturer: Hasenclever

Vertical Upsetter Capacity: 100 tons, Nominal size : 1.5 inch, Upsetting force : 1000 kN, Gripping force : 1250 kN, Total stroke of header side : 180 mm, Effective upsetting stroke : 112 mm, Stroke of top ...

Part Former Cold National 84

• Manufacturer: National

High Speed 4 Die Cold Nut Former Cutoff diameter: 13.5 mm @ 600N/mm2, Cutoff length: 6/14 mm Minimum/Maximum, KO stroke: 17mm, PKO stroke: 15 mm, Nut size: M8, Across flats: 14 mm, Pieces per minute: 330 ...

Ring Rolling Machine Wagner RAW160/125-3000/700

• Manufacturer: Wagner

Ring Rolling Mill Tyssen Wagner Dortmund Ring outer diameter : min : 400 mm, max. 3000 mm, Ring height : min : 30 mm, max. 700 mm, Rolling speed : 0,4-1,6 m/s, Radial rolling force : max. 160 ton, Axial ro...

Forge With Cart

This is a portable forge on a cart and with forge tools.

Metal Forge

Has a swinging metal and brick top, the body is a metal frame there are bricks in the center for insulation. The electric motor on the bottom is in unknown condition.

EUMUCO RW1

• Manufacturer: SMS Eumuco
• Model: RW1

Equipped With Max length of working piece-middle: 570mm Max length of working piece-outside: 890mm

National 84

• Manufacturer: National

Equipped With Max nut size: 8mm (5/16") | Max. hex nut a.f: 14mm (9/16") | Max. nut height: 11.5mm (29/64") | Max. length blank: 14mm (9/16") | Min. length blank: 6mm (1/4") | Max. dia. cutoff (60 kg): 13.5mm | M...

LEWIS 9FHA

• Manufacturer: Lewis

Equipped With 6 Entrance Rolls 6 Exit Rolls Air Clutch Flying Shear

HILL-ACME 1-1/4″ UPSETTER

• Manufacturer: Hill Acme

Equipped With * AIR CLUTCH Capacity: 1-1/4" | Stroke of header slide: 7" | Stock gatherer: 3-3/4" | Hold or recede: 1-1/2" | Die of opening: 2" | Depth of die pocket: 12" | Width of die pocket: 8" | Length of die...

SHIMAZU SUPER 4

• Manufacturer: SHIMAZU

Equipped With Tapping range: M8-M12 (5/16-1/2") | Shape of tap used (bent shank): 245mm L x 30mm R | Main motor: 1.5kW (variable speed pulley) | Dims: 780L x 870W x 1200H | Weight: 400 kgs.

NEDSCHROEFF BL4

• Manufacturer: NEDSCHROEFF

Equipped With Cutoff diameter range: M10 - M16 | Pressing power: 150t (1500kN) | Min - max bolt length range: 65 - 300mm | Min-max. cutting length: 65-340mm | Max. thread length: 150mm | Max. width across flats: ...