Used equipment

Electro-Applications INC. PA-USA 2000 deg F, 115V, 2.2KW. Working internal 3 x 11

• Manufacturer: Electro-Applications INC. PA-USA

Furnace - 2000 deg F, 115V, 2.2KW, sn74-1380, with tools. Working area 3 x 11 x 10 Inch. Electro-Applications INC. PA-USA An Authorization of Release is required if a person or representative other than the GovDe...

GFM SXL 40 Radial Forging Machine

• Manufacturer: GFM

Reconditioning by GFM 1991 from 650 Ton per Hammer to 800 Ton per Hammer Machine Dimension: Axis height of forging above the hall level - 750 mm Maximum height of machine above the hall level - 2,950 mm Maxim...

GFM SX 06 Radial Forging Machine

• Manufacturer: GFM

Forging force: 80 Ton | Number of hammers: 4 | Number of strokes per minute: 1,200/minute | Range of shift on diameter: 35 mm | Forging eccentric: 3 mm | Firing hammer length: 150 mm | Basic material maximum dia...

Kaltek 6300 Ring Rolling Mill

• Manufacturer: Kaltek

Outside diameter of finished ring: 1,200 - 6,300 mm | Height of finished ring: 80 - 1,000 mm | Inside diameter of ring blank for mandrel diameter - 300mm: min 320 mm | Height of ring blank: max 1,050 mm | Ring w...

SMS 100 Ton Manipulator

• Manufacturer: SMS Eumuco

PLC System – CPU S7 – 400 Siemens Main Pump 440V 6P 288 kW Siemens

H280/V180 – 3500 Ring Rolling Machine

Outside diameter of finished ring: 600 - 3,500 mm | Height of finished ring blank for mandrel diameter 2,200 mm: 100 - 800 mm | Height of ring blank (min / max): 240 / 800 mm | Ratio of wall thickness to height:...

Johnson Gas supply company natural gas forge

• Manufacturer: Johnson

Johnson Gas supply company natural gas forge Contact Kody Jurgens for questions -

ACMA Hot forging machine

• Manufacturer: Acma

Equipped With * 1Die 1Blow forming stations * 15kW Induction heating unit & self container chiller * Machine suited for production of ejector pins or exotic fasteners & material parts ? Titanium, Inconel, Waspall...

CYLINDER FORGING MANUFACTURING LINE

• CYLINDER FORGING MANUFACTURING LINE • 2016 AJAX TOCCO POWER ZONE INDUCTION HEATER – COMPLETE SYSTEM WITH FIVE COILS ON FOUR INDEPENDENT ZONES, MATERIAL FEEDER SYSTEM, FEED SYSTEM HYDRAULICS, PLCS AND DEDICATED ...

1,000 ton OWZ 16" Bar diameter

Additional info: Model - HRW-1000 Working Range: Rounds: Ø 100 – 400 mm Squares: 400 x 400 mm Straightness of the bar Ø 320: 10 – 45 mm Ø 210: 10 – 25 mm Ø 130: 15 – 40 mm Ø 90: 25 – 40 mm Weight of the bar -...

500kW Interpower 2-1/4" to 6" Induction Billet Heater,

Description: 500kW Interpower 2-1/4" to 6" Induction Billet Heater

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

Drop-Hammer-100-LBS

"Normal wear from use, needs a good cleaning. some rust. broken valve handle." Weight...2380lbs. Height...93″Floor footprint...28″ L-R, 22″ F-B. Currently bolted onto a steel plate that is 22″x22″x1″ thick. The a...

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

"Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...

Part Former Hot Hatebur AMP20

• Manufacturer: Hatebur

Both AMP-20’s fully rebuilt by a Hatebur Engineer in 2008 Number of forming dies : 3, Production : 120-180 ppm, Max. outer diameter for round parts : 38 mm, Max. width across flats (hex) : 36 mm, Bar diamet...