Used frames

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

1996 PH OGF-50 #1112425

• Manufacturer: PH

15" STROKE 34" DAYLIGHT 30" X 27" BED 5.29" DIAMETER RAM END 100 GALLON RESERVOIR PALM BUTTONS ALLEN BRADLEY CONTROLLS 1990 MAX PSI YEAR 1997 8" CYLINDER BORE SPEEDS: ADVANCE 80 IPM RETURN 151 IPM EQUIPPED W: JOG...

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

Reduce Forging Roll Ajax 6

• Manufacturer: Ajax

Working Pressure : 100 tons, Width of Roll dies : 1500 mm, Maximum roll die dia. : 1100 mm, Maximum Length rolled section : 2050 mm, Weight, approx. : 160 tons, Maximum Billet Dia : 300 RCS mm, Equipped Wit...

Casting ladle MOZER 600kg

• Manufacturer: MOZER

Overhauled by Foundry service in 2012 Dimensions: Length: 1500; Width: 950mm; Height: 1250mm Useful dimensions: Ø590mm; Depth: 640mm Planetary gearbox With 2 pouring spouts

Metal Forge

Has a swinging metal and brick top, the body is a metal frame there are bricks in the center for insulation. The electric motor on the bottom is in unknown condition.

250 Kg ANYANG SELF-COMPRESSING DRUM HAMMER

Energy of blow: 560 kg.m | Max. stroke of tup: 450 mm | Ram weight: 250 kg | Distance between axel tup and frame: 420 mm | Stroking rate: 140 s.p.m | Motor: 22 KW | Frame weight: 5000 kg | Anvil weight: 2500 kg ...

400 Kg ANYANG SELF-COMPRESSING DRUM HAMMER

Energy of blow: 950 kg.m | Max. stroke of tup: 530 mm | Ram weight: 400 kg | Distance between axel tup and frame: 520 mm | Stroking rate: 120 s.p.m | Motor: 30 KW | Frame weight: 8000 kg | Anvil weight: 4800 kg ...

40 tons Hammer Counterblow Beche DGH40

• Manufacturer: Beche

Capacity : 40 tons, Impact energy : 40000 mkg, Total hammer stroke : 1250 mm, Max. number of blows : 80 per minutes, Average number of blows : 6 per minutes, Air consumption per blow in m3 of delivered air a...

1 ton Hammer Forging Pneumatic Huta MPM3150C

• Manufacturer: Huta Zygmunt, Polish

U-Frame Capacity : 1 tons, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in ...

1600 tons Hot Forging Line Farina

• Manufacturer: Farina

Capacity : 1600 tons, Slide stroke : 250 mm, Continuous stroke per minute : 82 n°, Single stroke per minute : 18 n°, Die space : 755 mm, Die space adjustment : 18 mm, Table dimensions : L to r : 1000 mm, ...

Part Former Hot Tyazhpressmash TPM30

• Manufacturer: Tyazhpressmash

Forming Station 3 Capacity : 250 tons, Total Forming Load : 2500 kN, Stroke Slide : 160 mm, Slug length for one forged part : Minimum : 20 mm, Maximum : 72 mm, Max. forged part OD : 67 mm, Max. forged par...

5000 tons Hot Forging Line Eumuco KSP500

• Manufacturer: SMS Eumuco

1) Press Hot Forging Capacity : 5000 tons, Ram stroke : 330 mm, Stroke per minutes : 45, No. of real working strokes : 10, Max. Shut height : 1217.5 mm, Ram adjustment : 15 mm, Table width : 1520 mm, Tabl...