Used ram

Osborn 730 RJWA Ram Jolt Molding Machine

• Manufacturer: Osborn

Osborn 730 RJWA Ram Jolt Molding Machine Equipped with Shuttle System

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

1,250 kg Lasco model KH-125 Forging

• Manufacturer: Lasco

Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

17,000 lb (7,800 kg) Eumuco Electro-

• Manufacturer: SMS Eumuco

Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

8,000 lb Erie Drop Forging Hammer, Re:25971

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition

40,000 kg Schloemann (Beche) CounterBlow Forging

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs

2006 80mm dia Jaewoo JCP-450

• Manufacturer: Jaewoo

Additional info: Minimum cutting diameter: 28mm Max cutting length: 450mm Minimum cutting length: 50mm Feeding motor power: 2.2 kW Very good working condition Available for immediate inspection and delivery Still...

16,000 ton SMS Horiz Direct Sgl Action Ext Press, Ind Billet

Additional Data: Main cylinder: 13560 MT Side cylinder: 2440 MT Working pressure: 31 MPa Main cylinder dia.:2360 mm Side cylinder dia.: 360 mm x 4 pcs Return force: 10.8 MN (10800 MT) Extrusion stroke: 3700 mm Bi...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

1970 1200 ton Hatebur model AMP 70 Hi-Speed

Available for immediate inspection and delivery Dia: 60 mm | Tons: 1,200 tonnes | Builder: Hatebur | Part dia: 125 mm | Max cutoff length: 140 mm | Max die ejector: 130 mm | Part wt: 6 kgs | Min cutoff length: 45...