Used side

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

1986 25 ton Pahnke FM 25/64 Rail Bound, Max tongs

• Manufacturer: Pahnke

Lift tons: 25 tonnes | Max rds: 1,473 mm | Min rds: 609 mm | S-shift: 250 mm | Vertical stroke of tongs parallel to floor: 800 mm | Rail centers: 3,750 mm | Max turning circle of fully opened tongs: 2,058 mm | L...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

16,000 ton SMS Horiz Direct Sgl Action Ext Press, Ind Billet

Additional Data: Main cylinder: 13560 MT Side cylinder: 2440 MT Working pressure: 31 MPa Main cylinder dia.:2360 mm Side cylinder dia.: 360 mm x 4 pcs Return force: 10.8 MN (10800 MT) Extrusion stroke: 3700 mm Bi...

Part Former Cold National 625S3

• Manufacturer: National

Parts Formers, 6 Die Cutoff Diameter: 3/4" Mild Steel, Cutoff Diameter: 5/8" Alloy Steel, Die Kickout: 3", Cutoff Length: 2 1/2", Pieces per Minute: 100-120, Electricals: 40 HP 230/460 v AC Motor and Contro...

Upsetter Hasenclever WSHK100

• Manufacturer: Hasenclever

Vertical Upsetter Capacity: 100 tons, Nominal size : 1.5 inch, Upsetting force : 1000 kN, Gripping force : 1250 kN, Total stroke of header side : 180 mm, Effective upsetting stroke : 112 mm, Stroke of top ...

Reduce Forging Roll Ajax 6

• Manufacturer: Ajax

Working Pressure : 100 tons, Width of Roll dies : 1500 mm, Maximum roll die dia. : 1100 mm, Maximum Length rolled section : 2050 mm, Weight, approx. : 160 tons, Maximum Billet Dia : 300 RCS mm, Equipped Wit...

BLA 1200 S

• Manufacturer: Unknown

BLA 1200 S Universal 90° side tilting machine with one fixed and one movable table, of modern design, allows excellent working safety, with high and constant productivity. Prepared for the most advanced automatio...

P3M/S1

• Manufacturer: Unknown

P3M/S1 Large machine with working cycle for front and side casting. Equipment for extracting metal males in upper radial position, for front and side casting, first detachment by making reaction on the shell. Ind...

P2AM Shellers for Brass

• Manufacturer: Unknown

P2AM Medium size machine with working cycle for front and side casting. Especially suitable for hydrosanitary fittings.With ejector/extractor cylinder on the right head and " group equipment " on the left header....

P2M Brass Shellers

• Manufacturer: Unknown

P2M Medium size machine with working cycle for front and side casting. Especially suitable for hydrosanitary fittings.Ejector/extractor cylinders on the heads. Its simplicity and constructive functionality ensure...

P2/S1 Shellers for Brass

• Manufacturer: Unknown

P2/S1 Medium-sized machine with working cycle for front and side casting. Equipment for extracting metal males in upper radial position, for front and side casting, first detachment by making reaction on the shel...

IMV PRESS 500 ton

• Manufacturer: IMV

Ton: 500 | Table - width (mm): 600 | Number of strokes / min: 45 | Subtype (dm / cdc): DM | Ce mark: No | Slide - stroke (mm): 300 | Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly):...

Billet Shear 160

• Manufacturer: Ficep

Press capacity : 800 tons, Max diameter of bar : 45-160 mm, Side for square section : 140 mm, Maximum length of the cut piece : 750 mm, Stroke/min : 15, Stroke of ram : 110 mm, Speed flywheel : 300 rpm, Ma...