Machine Tools » Forging

Building Filters

290

Used size

  • Trusted Seller
    6,200 kg Nittan Air Forging

    6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

    • Manufacturer: Nittan

    Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

    Rockville Centre, NY
  • Trusted Seller
    1,250 kg Lasco model KH-125

    1,250 kg Lasco model KH-125 Forging

    • Manufacturer: Lasco

    Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

    Rockville Centre, NY
  • Trusted Seller
    2,900 kg Lasco model KH

    2,900 kg Lasco model KH 315

    • Manufacturer: Lasco

    Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

    Rockville Centre, NY
  • Trusted Seller
    17,000 lb (7,800 kg) Eumuco

    17,000 lb (7,800 kg) Eumuco Electro-

    • Manufacturer: SMS Eumuco

    Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

    Rockville Centre, NY
  • Trusted Seller
    50kj Beche KGH 5.0B Short

    50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

    • Manufacturer: Beche

    Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

    Rockville Centre, NY
  • Trusted Seller
    HYODONG Nut Former

    HYODONG Nut Former

    • Manufacturer: HYODONG

    Equipped With Specifications: Features: EXAMPLES OF TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and punch ...

    Vaughan, Canada
  • Trusted Seller
    2014 Clansman Dynamic Model C2100

    2014 Clansman Dynamic Model C2100 Rail-Bound Forging Manipulator

    • Manufacturer: Clansman

    Features: 6 Axes of Movement 270 Degree Cab Rotation Equipped With: 6 Axes of Movement 270 Degree Cab Rotation 400L Hydraulic Tank 460VAC,3PH, 60Hz, 100A Power requirements NOTE: Purchased New in 2014, Used for 2...

    Melville, NY
  • Trusted Seller
    8,000 lb Erie Drop Forging

    8,000 lb Erie Drop Forging Hammer, Re:25971

    • Manufacturer: Erie Press Systems

    Dismantled and moved to storage Very good working condition

    Rockville Centre, NY
  • Trusted Seller
    40,000 kg Schloemann (Beche) CounterBlow

    40,000 kg Schloemann (Beche) CounterBlow Forging

    • Manufacturer: Schloemann (Beche) DGH 40

    Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

    Rockville Centre, NY
  • Trusted Seller
    10,000 lb Chambersburg model "L"

    10,000 lb Chambersburg model "L" Closed

    • Manufacturer: Chambersburg CECO "L" Power Drop

    Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

    Rockville Centre, NY
  • Trusted Seller
    26,400 lb (12 tonne) Lasco

    26,400 lb (12 tonne) Lasco KGK 1600 Electro-

    • Manufacturer: Lasco

    Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

    Rockville Centre, NY
  • Trusted Seller
    HYODONG 36mm

    HYODONG 36mm

    • Manufacturer: HYODONG

    Equipped With Specifications: Features: MACHINE FEATURES/TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and p...

    Vaughan, Canada
  • Trusted Seller
    National 84

    National 84

    • Manufacturer: National

    Equipped With Max nut size: 8mm (5/16") | Max. hex nut a.f: 14mm (9/16") | Max. nut height: 11.5mm (29/64") | Max. length blank: 14mm (9/16") | Min. length blank: 6mm (1/4") | Max. dia. cutoff (60 kg): 13.5mm | M...

    North America
  • Trusted Seller
    HYODONG Three & Four Die

    HYODONG Three & Four Die - Compact Design

    • Manufacturer: HYODONG

    Equipped With Specifications: Bolt Size: M6 [1/4"] (10AF) Bolt Size: M8 [5/16"] (14AF) No of dies: 3-4 Dies Forging Load: 300kN // 500kN Output speed: up to 400/300ppm Features: * New Simple & Compact Design mini...

    Vaughan, Canada
  • Trusted Seller
    HYODONG 6Die - Eco Design

    HYODONG 6Die - Eco Design

    • Manufacturer: HYODONG

    Equipped With Specifications: HLNP-618 Specifications: Features: HL Series Highlights: ** Innovative former design using knuckle press type structure & power transmission method. With no crank shaft, machine uses...

    Vaughan, Canada
12345

Overview

Forging equipment is used to shape metal through hammering, pressing, or rolling. This category includes machinery like forge hammers, presses, and rolling mills. These machines are essential in manufacturing industries for producing strong, durable metal parts for automotive, aerospace, and construction sectors.

FAQ

What should I consider when buying used forging equipment?

Consider the machine's age, operational hours, maintenance history, and any signs of wear or damage. Also, check if the equipment meets your specific production requirements.

How is forging equipment typically shipped?

Forging equipment is heavy and requires specialized transport services. Ensure the machinery is properly secured and protected during transit, often requiring disassembly and careful packaging.

What maintenance does forging equipment require?

Regular maintenance includes checking and lubricating moving parts, inspecting for cracks or damages, and ensuring proper alignment and calibration. Follow the manufacturer's manual for detailed maintenance schedules.