Processing » Foundry & Casting » Belgium

Building Filters

1448

Used Foundry & Casting in Belgium

  • Cast Iron basin mixer/Grohe

    Cast Iron basin mixer/Grohe

    • Manufacturer: Fonte/Grohe

    Basin mixer tap Brand: Cast Iron/Grohe]]>

    Hoeilaart, Belgium
  • Trusted Seller
    2008 Fettling Centre MAUS SAM300

    2008 Fettling Centre MAUS SAM300 S

    • Manufacturer: Maus

    Cast part: length 300mm, width 300mm, height 250mm, Ø 360mm, weight 15 kg With 1 vertical cutting/grinding disc With 1 vertical grinding disc With 1 inside grinding tool

    Amel, Belgium
  • Trusted Seller
    Permeameter SIMPSON

    Permeameter SIMPSON

    • Manufacturer: Simpson

    Dimensions: Length: 260mm; Width: 330mm; Height: 430mm 220V;50Hz;0,1A Suitable for the following processes: Cold Box Core oil Clay-bonded sand Hot Box Nobake/Air blower Shell/Croning (sand for cast mould shells a...

    Amel, Belgium
  • Trusted Seller
    Bottom pouring ladle with planetary

    Bottom pouring ladle with planetary gear, 8 t

      Brand: FOUNDRY SERVICE, serial number: 4827 With one bottom pouring device ,with out horizontal arm and plug bar are not inclluded With 2 pouring spouts

      Amel, Belgium
    • Trusted Seller
      Silicone moulding press for centrifuge,

      Silicone moulding press for centrifuge, 2 x 350mm

        Brand AB, type: S2000, serial number: TRF2/350 Giri 300-700 Pneumatic press with 2 swivel tables Ø 350 mm For silicone pattern discs For centrifugal casting of small parts like jewellery, figurines, medals, etc.

        Amel, Belgium
      • Trusted Seller
        Moisture balance METTLER

        Moisture balance METTLER

        • Manufacturer: Mettler - Toledo

        Dimensions: Length: 320 mm; Width: 200 mm; Height: 270 mm Max weighing capacity: 360 g, min weighing capacity: 0.5 g

        Amel, Belgium
      • Trusted Seller
        Core shooter LAEMPE L40

        Core shooter LAEMPE L40

        • Manufacturer: Laempe / Röperwerk

        External dimensions: Length: 3350 mm; Width: 3000 mm; Height: 3340 mm With new cabin Maximum core box size: Width: 1190 mm; Depth: 1000 mm; Height: 790 mm (for horizontal boxes) Maximum span: 1200 mm; minimum spa...

        Amel, Belgium
      • Trusted Seller
        Sand compactability tester GF; PVG

        Sand compactability tester GF; PVG

        • Manufacturer: GF

        Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm

        Amel, Belgium
      • Trusted Seller
        Polisher grinder MECAPOL PRESI, Ø

        Polisher grinder MECAPOL PRESI, Ø 200mm

        • Manufacturer: Presi

        External dimensions: Length: 350 mm; Width: 380 mm; Height: 200 mm With water sprinkler With 7 additional plates

        Amel, Belgium
      • Trusted Seller
        2007 Sand feeder 31 liters,

        2007 Sand feeder 31 liters, KLEIN

        • Manufacturer: Klein

        Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

        Amel, Belgium
      • Trusted Seller
        Permeability tester GF, type SPDU

        Permeability tester GF, type SPDU

        • Manufacturer: GF

        External dimensions: Width 400 mm, Depth: 230 mm, Height 480 mm

        Amel, Belgium
      • Trusted Seller
        Automatic core shooter LAEMPE L10

        Automatic core shooter LAEMPE L10

        • Manufacturer: Laempe / Röperwerk

        All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

        Amel, Belgium
      • Trusted Seller
        Degassing unit (impeller) FOSECO/BOMA

        Degassing unit (impeller) FOSECO/BOMA

        • Manufacturer: Foseco

        Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

        Amel, Belgium
      • Trusted Seller
        2000 Mobile hydraulic wedge station

        2000 Mobile hydraulic wedge station HOLMATRO

        • Manufacturer: Holmatro

        Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

        Amel, Belgium
      • Trusted Seller
        2000 Mobile hydraulic wedge station

        2000 Mobile hydraulic wedge station HOLMATRO

        • Manufacturer: Holmatro

        Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

        Amel, Belgium
      • no-image_en.png

        Lüber LW-FDA 425 Foundry & Casting

        • Manufacturer: Lüber
        • Model: LW-FDA 425

        Good condition Lüber LW-FDA 425 Foundry & Castings manufactured in 2018. Located in Belgium and other countries. Click request price for more information.

        Belgium
      678910

      Overview

      Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

      FAQ

      What should I consider when buying used foundry and casting equipment?

      Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

      How do I ensure the safe shipping of foundry and casting equipment?

      Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

      What is the maintenance schedule for foundry and casting equipment?

      Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.