Processing » Foundry & Casting » Germany

Building Filters

241

Used processing in Germany

  • 2006 KLEIN diaphragm dosing device

    2006 KLEIN diaphragm dosing device BDG 304

    • Manufacturer: Klein

    Dosing volume 200-300 cm³

    Meinerzhagen, Germany
  • 1993 GTG - Foundry Technology

    1993 GTG - Foundry Technology GÖTZ BDE 2-770/960-A-G

    • Manufacturer: GTG - Gießereitechnik GÖTZ

    Two-component binder system, metering pumps 770/960 cm³

    Meinerzhagen, Germany
  • 2017 SEGAB cold box liquid

    2017 SEGAB cold box liquid dosing device FD

    • Manufacturer: Segab

    Two-component binder system, dosing pumps 2.23 l/min, 0.37 kW, switch cabinet, PLC control, dosing valves

    Meinerzhagen, Germany
  • 1982 GISAG butterfly mixer AMF

    1982 GISAG butterfly mixer AMF 160

    • Manufacturer: Gisag

    Mixing container, Ø 960 x 500 mm, usable capacity max. 160 dm³, discharge height approx. 675 mm, mixing blades, batch max. 200 kg, capacity approx. 3-4 t/h, pneumatic discharge gate, drive power 7.5 kW, connected...

    Meinerzhagen, Germany
  • LAEMPE / RÖPER / Vogel

    LAEMPE / RÖPER / Vogel & Schemmann 1 - 2.5 - 5 - 12 - 16 - 20 - 25 Liters

    • Manufacturer: Laempe / Röperwerk

    Please ask for our separate accessories and parts list!

    Meinerzhagen, Germany
  • RÖPERWERK H 40

    RÖPERWERK H 40

    • Manufacturer: Laempe / Röperwerk

    Four-column machine, shooting volume 40 l, working area 1100 x 1000 x 1000 mm, core box max. 1000 kg, clamping/separating device, vibratory feeder, LUEBER ColdBox gas flushing unit LW-FDA1640, hydraulic unit, saf...

    Meinerzhagen, Germany
  • RÖPER H 16

    RÖPER H 16

    • Manufacturer: Laempe / Röperwerk

    Four-column machine, shot volume 16 l, core box max. 620 x 300 x 475 mm/ 300 kg, clamping & separating device, sand hopper, housing, PLC control system

    Meinerzhagen, Germany
  • 1990 LAEMPE core shooting unit

    1990 LAEMPE core shooting unit LKFZ 20

    • Manufacturer: Laempe / Röperwerk
    • Model: LKFZ 20

    Shooting volume 20 l, vertical/horizontal core box division, core box max. 750 x 800/790 x 335-630 mm, vacuum clamping & separating device, sand hopper, cabin, ColdBox gassing unit LG-R 1", hydraulic unit, PLC co...

    Meinerzhagen, Germany
  • 1976 RÖPER / LAEMPE LKV

    1976 RÖPER / LAEMPE LKV H 12

    • Manufacturer: Laempe / Röperwerk

    Single-column machine, shooting volume 12 l, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-hand sa...

    Meinerzhagen, Germany
  • VOGEL & SCHEMMANN MISCHKA II

    VOGEL & SCHEMMANN MISCHKA II

    • Manufacturer: Vogel

    Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 5.5 kW, connected loads 400 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...

    Meinerzhagen, Germany
  • 2000 SGB ETDH 315

    2000 SGB ETDH 315

    • Manufacturer: SGB

    Mainly consists of: LxWxH 1320x800x1800 Sold as seen, EXW

    Iserlohn, Germany
  • ABP ID-8

    ABP ID-8

    • Manufacturer: ABP

    Mainly consists of: 1 steel chute ready for installation Sold as seen, EXW

    Iserlohn, Germany
  • Marbaise RSD 140V

    Marbaise RSD 140V

    • Manufacturer: Marbaise

    Planetary gearbox RSD 140V for up to 30 ton pouring ladle

    Iserlohn, Germany
  • 2012 SPECTRO SPECTROTEST TXC 03

    2012 SPECTRO SPECTROTEST TXC 03

    • Manufacturer: SPECTRO

    Mainly consists of: Portable spectrometer for metal analysis of iron, aluminum, nickel, and steel Housing Screen Storage compartment Probe holder Trolley Probe Argon cylinder holder Air filter CO2 and particulate...

    Iserlohn, Germany
  • 2021 IAS Germany MTO 600-1500

    2021 IAS Germany MTO 600-1500

    • Manufacturer: IAS Germany

    Mainly consists of: Crucible furnace with tilting chair, hydraulic cylinder, furnace lid and weighing device Hydraulic system with hydraulic control panel and crucible push-out device Furnace platform made of ste...

    Iserlohn, Germany
1011121314

Overview

Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

FAQ

What should I consider when buying used foundry and casting equipment?

Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

How do I ensure the safe shipping of foundry and casting equipment?

Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

What is the maintenance schedule for foundry and casting equipment?

Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.