Processing » Foundry & Casting » Germany

Building Filters

240

Used processing in Germany

  • 1999 FRECH DAM 315 S

    1999 FRECH DAM 315 S

    • Manufacturer: Frech

    Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...

    Schorndorf, Germany
  • 2003 Frech Espana DAW 125

    2003 Frech Espana DAW 125 PD SBC3

    • Manufacturer: Frech

    Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

    Schorndorf, Germany
  • 1992 FRECH DAW 50

    1992 FRECH DAW 50

    • Manufacturer: Frech

    Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...

    Schorndorf, Germany
  • 2000 FRECH DAW 80S

    2000 FRECH DAW 80S

    • Manufacturer: Frech

    Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.

    Schorndorf, Germany
  • 2020 FRECH W50Zn-RC

    2020 FRECH W50Zn-RC

    • Manufacturer: Frech

    Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...

    Schorndorf, Germany
  • Cast iron stop and clamping

    Cast iron stop and clamping bracket 300

      steplessly adjustable and lockable three full clamping sides with system holes with slotted holes for stepless adjustment incl. fine scaling for the adjustment of the stop dimensions better sliding behaviour due ...

      Heimertingen, Germany
    • ProfiPlusLine stop and clamping bracket

      ProfiPlusLine stop and clamping bracket cast iron hardened 200

        Infinitely adjustable and lockable Three full clamping sides with system holes With slotted holes for stepless adjustment Better sliding behavior due to combination of cast iron on steel Grid lines shorten the as...

        Heimertingen, Germany
      • Support and clamping frame cast

        Support and clamping frame cast iron

          Five fully-fledged clamping sides with system holes result in a multitude of possible applications as connecting elements between different system parts very versatile combinable: >> through system bore >> variab...

          Heimertingen, Germany
        • Corner module cast iron

          Corner module cast iron

            diagonal table extension flexible use as prism, support, stop, etc. With the DEMMELER corner modules, long profiles and beams can also be clamped on smaller welding tables - corner module placed in the corner and...

            Heimertingen, Germany
          • Processing sand-lime brick

            Processing sand-lime brick

            • Manufacturer: LISSMAC Maschinenbau GmbH

            Select your country below so we can show you the correct information for your location.

            Bad Wurzach, Germany
          • 1999 LAEMPE Core Drilling Auto

            1999 LAEMPE Core Drilling Auto LKFZ 40 (L-40)

            • Manufacturer: Laempe / Röperwerk
            • Model: LKFZ 40

            Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...

            Meinerzhagen, Germany
          • 2014 REISSAUS & BAUMBERG KSA

            2014 REISSAUS & BAUMBERG KSA 40

            • Manufacturer: REISSAUS & BAUMBERG

            Shooting volume 40 l, horizontal core box division, core box max. 1250x1050x980 mm, ISS continuous core sand mixer TRITON TS2 (1992), sand hopper, cabin, hydraulic unit, control panel, PLC control SIEMENS S7

            Meinerzhagen, Germany
          • VOGEL & SCHEMMANN MISCHKA III

            VOGEL & SCHEMMANN MISCHKA III GF-S/70 'D'

            • Manufacturer: Vogel

            Batch max. 500 kg, hopper Ø 925 x 600 mm, discharge height approx. 1000 mm, mixing paddle, pneumatic discharge gate, drive power 10.3 kW

            Meinerzhagen, Germany
          • 1994 WEBAC-MICHEL Kugelmischer M 30-A-2

            1994 WEBAC-MICHEL Kugelmischer M 30-A-2

            • Manufacturer: Webac

            Batch mixer 30 kg, steel support structure, two-part sand storage hopper, sand dosing, additive hopper with discharge screw conveyor, liquid component container storage, binder dosing system, 2 discharge points, ...

            Meinerzhagen, Germany
          1213141516

          Overview

          Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

          FAQ

          What should I consider when buying used foundry and casting equipment?

          Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

          How do I ensure the safe shipping of foundry and casting equipment?

          Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

          What is the maintenance schedule for foundry and casting equipment?

          Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.