Processing » Foundry & Casting

Building Filters

Related Events

Live Now

Pharma & Lab Equipment Auction: Capsule Fillers, HPLCs, Dryers & More

by Federal Equipment - Auctions (Proxio Group)

Online
Ends Sep 18th, 16:00 CDT
View event
385

Used separator

  • Trusted Seller
    Loading band, 3500 mm x

    Loading band, 3500 mm x 500 mm

    • used

    External dimensions: length 4000 mm, width 1450 mm, hauteur 2150 mm With small loading hopper, on feet V-belt drive, separated gear box

    Amel, Belgium
  • Trusted Seller
    1989 Semi-automatic moulding plant HWS-HSP-2

    1989 Semi-automatic moulding plant HWS-HSP-2

    • used

    • Manufacturer: HWS-Sinto

    With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

    Amel, Belgium
  • Trusted Seller
    2009 Amine Gas Washer BGT,

    2009 Amine Gas Washer BGT, 9000 m³/h

    • used

    • Manufacturer: BGT

    Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

    Amel, Belgium
  • Trusted Seller
    Chill, 350 mm x150 mm

    Chill, 350 mm x150 mm x 100 mm

    • used

    Outside dimensions: L 620/740 mm, with holders, width 250 mm With a half separation in the middle 350 mm x1 50 mm x 100 mm Very conic at the bottom, with 2 holders

    Amel, Belgium
  • Trusted Seller
    1991 Permanent overband magnet, width

    1991 Permanent overband magnet, width 700mm

    • used

    • Manufacturer: Axmann

    Motor: 2,2 kW, 380 V, brand BAUER, 50 Hz, type: drum motor Overhead magnetic separator With belt tension With supervision With cover plate made off stainless steel With suspension device

    Amel, Belgium
  • Trusted Seller
    Vibrating polishing machine, brand RÖSSLER

    Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

    • used

    Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

    Amel, Belgium
  • Trusted Seller
    Greensand mixer capacity 5-6 t

    Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

    • used

    Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

    Amel, Belgium
  • LAEMPE / RÖPER / Vogel

    LAEMPE / RÖPER / Vogel & Schemmann 1 - 2,5 - 5 - 12 - 16 - 20 - 25 Liter

    • used

    • Manufacturer: Laempe / Röperwerk

    Please ask for our separate accessories and parts list!

    Meinerzhagen, Germany
  • Trusted Seller
    Nobake moulding plant IMF

    Nobake moulding plant IMF

    • used

    ± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

    Amel, Belgium
  • Trusted Seller
    Shake-out grid 2400 mm x

    Shake-out grid 2400 mm x 2300 mm

    • used

    External dimensions: 2700 mm x 2300 mm, h. 2570 mm (on foot) Motor ELEKTRIM, 18,5 kW, 380/415 V, 977 rpm With conus on the exit, with one vibrating axle motor on a separate base The grate is on 4 rubber blocs

    Amel, Belgium
  • Trusted Seller
    Small permanent drum magnet with

    Small permanent drum magnet with drive

    • used

    • Manufacturer: BMD

    External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

    Amel, Belgium
  • Trusted Seller
    Small permanent drum magnet with

    Small permanent drum magnet with drive

    • used

    • Manufacturer: BMD

    External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

    Amel, Belgium
  • Trusted Seller
    Amine Gas Washer BGT, 20

    Amine Gas Washer BGT, 20 000 m³/h

    • used

    • Manufacturer: BGT

    400/690V; 29kW; 50HZ With protection basin: Ø2200mm; Height: 750mm; Volume: 2,85m³ With PH-electrode and control unit With control unit S7-300 With dust separator With exhaust fan With chimney With CE in document...

    Amel, Belgium
  • Trusted Seller
    Ladle heating station PROMEOS

    Ladle heating station PROMEOS

    • used

    • Manufacturer: Prometeos

    Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...

    Amel, Belgium
  • Trusted Seller
    2014 Core shooter LAEMPE LL10

    2014 Core shooter LAEMPE LL10

    • used

    • Manufacturer: Laempe / Röperwerk

    Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

    Amel, Belgium
23456

Overview

Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

FAQ

What should I consider when buying used foundry and casting equipment?

Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

How do I ensure the safe shipping of foundry and casting equipment?

Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

What is the maintenance schedule for foundry and casting equipment?

Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.