Used 4t

2022 Andromat AMX 40 T4/T3 FW

• Manufacturer: Andromat

Andromat AMX 40 T4/T3 FW Manipulator Andromat AMX 40 T4/T3 FW, 1,100 lb. Gripper Capacity, Hydraulic Pump, On Rail Car, 2022 EQUIPPED WITH: Rail Car Hydraulic Pump

Treatment ladle UTARD, ± 3 - 4 t

With wormwheel gearbox, lining to be renewed Weight: ± 3500 kg | Outside dimensions: 1900 mm x 1300 mm, h. 2850 m | Useful dimensions: Ø 1120 mm, h. 1700 mm

Sandsilo, 3.5 - 4 t, ± 2 m³

On 4 feet, 1600 mm x 1600 mm Weight: 250 kg | Exterior height: 2500 mm | Useful dimensions: Ø 1300 mm, h. 2000 mm | Cylinder height: 1000 mm | Cone height: 1000 mm

Bottom pouring ladle ROPER, 3,5 - 4 t

Useful Ø 1140mm, useful height 1140mm Wth oil bath gearbox, lining and lifting bail protection

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

BALDOR RELIANCE INDUSTRIAL MOTOR 300HP PH3 60HZ 447T FR CAST IRON M25694T-4

• Manufacturer: Baldor - Reliance

“VISIBLE SURFACE RUST & EXPOSED TERMINAL WIRING SEE PICTURES, SHELF WEAR” BALDOR RELIANCE INDUSTRIAL MOTOR CAT NO. M25694T-4 SPEC NO. P44G4428 PHASE: 3 HP: 300 HZ: 60 FRAME: 447T VOLTS: 460 POLES: 4 RPM: 1785 AM...

Casting ladle ROPER, 4 t

With Oilbathgearbox Building year: 1988 | Weight: 3000 kg

78.74" x 236.22" 15.75" Cast Iron T-Slotted Floor Plates (2-Available)

Features: T-Slotted Matched Set Cast Iron Equipped With: T-Slotted Cast Iron Construction NOTE:

78.74" x 236.22" 15.75" Cast Iron T-Slotted Floor Plates (6-Available)

Features: T-Slotted Matched Set Cast Iron Equipped With: T-Slotted Cast Iron Construction NOTE:

T-Slotted Floor Plate 78 x 169.5" Cast Iron

• Manufacturer: Mfr. N/A

Features: Cast Iron Construction T-Slotted Equipped With: T-Slotted NOTE: Inspect In Our Philadelphia PA Warehouse

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

Furan sand screw mixer BORDEN, ± 2 t/h with silo

Type: Micro 86, Serial number: 164 The mixer is hanging under the bunker External dimensions when fully mounted: 5800 mm x 2240 mm, h. 5400 mm Mixer motor UNELEC, TtypeT132M16; 4 kW; 960 rpm; 220/380 V Bunker wit...

Sand silo 38m³

Dimensions: Ø2900mm; height: 10700mm Useful dimensions: Ø2850mm; height: 6150mm without cone Silo closed to the bottom With 2 doors With fill level probe With silo filter Without railing and access ladder

Sand silo ±45m³

External dimensions: Length: 12 000mm; Ø2780mm Internal dimensions: Ø2730mm, height: 8000mm Height under cone Without access ladder With railing Without filter Without filling pipe With discharge flap