Used fire

Unbranded F-607-OTS 8" Cast Iron Fire Main Gate Valve

“NEW WITHOUT BOX. IN GOOD CONDITION. SEE PICTURES ATTACHED” Unbranded F-607-OTS 8" Cast Iron Fire Main Gate Valve Unbranded F-607-OTS 8" Cast Iron Fire Main Gate Valve The Unbranded F-607-OTS Cast Iron Fire Main ...

2018 Thermtronix GT-3000

• Manufacturer: Thermtronix

Gas Fired Aluminum Furnace w/ Hyd Tilt Function and 02 Crucibles per Furnace. Melt Rate Per Hour 850/1250 lbs. at 1300F Fully Automatic Power and Temp Control UL Listed and Flame Safety Controls Computer Designed...

Ladle heater fuel fired comprimed air atomizing

Plateau dimensions: Lenght: 2000mm; Width: 1800mm; Height: 440mm burn trolley: Width:750mm; Deepth: 1050mm; Hight: 560mm fuel burner are mounted one mobile subbase with horizontal flame with controlbox and compre...

Rotary Kiln, 5.5' X 32-1/2', Maxon Burner, Feeder - #4673732

• Manufacturer: Maxon
• Model: 400

Rotary Kiln, 5-1/2' diameter X 32 1/2 feet long shell. Product is fed by 7' long screw feeder and discharge is controlled by a Rotary Air Lock valve. Includes drum drive with motor and gear reducer. Equipped with...

Storz coupling wrench B/C steel malleable cast iron

• Manufacturer: Musterfirma

The BC coupling wrench is a specialized tool for operating fire extinguishing valves on board ships. Its robust construction ensures reliable engagement and disengagement of the valve couplings, thus enabling eff...

Core shooter RÖPER 2,5 l, turning table - automatic D1A

• Manufacturer: Laempe / Röperwerk

3-station turntable machine Simultaneous shooting and gassing As soon as the firing is finished, the automatic door opens and the operator can pick up the cores. With new NORGREN valve block With new SIEMENS TIA ...

Core shooter Laempe LF100; 100l

• Manufacturer: Laempe / Röperwerk

Core box dimensions: Time (without gassing) : - Automatic change time of horizontal box and firing plate: ±3min Power consumption: 3×400V, 50Hz; 3×150A; 55KW+15KW (vacuum pump 0.75KW)

RÖPER H12 overhauled and modernized

• Manufacturer: Laempe / Röperwerk

Shot volume: 12 litersTable: 400 mm x 700 mmPresetting of the table height with hand crankWith new gassing slideWith original RÖPER clamping system(1 fixed clamping jaw, 1 pneumatic clamping jaw, stroke ± 20 mm, ...

LK Machinery Impress Plus DCC 3500

• Manufacturer: LK Machinery

LK Impress Plus DCC 3500 Cold Chamber Die Casting Line (Unused 2022) Installed and commissioned with dry, test run only. Støtek melting system with Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace w...

Pipe Tube Hot DIP Galvanizing Line Electroplating Machine

• Manufacturer: Rainbow

No. Item Specifications Quan' Unit 1 zinc kettle zinc kettel 7.8*1.26*1.5 20.6 ton zinc kettel protective plate (2 pieces) 310S material:size:...

Hot DIP Galvanizing Line for Pipe

• Manufacturer: Rainbow

No. Item Specifications Quan' Unit 1 zinc kettle zinc kettel 7.8*1.26*1.5 20.6 ton zinc kettel protective plate (2 pieces) 310S material:size:...

Electroplating Equipment/Electroplating Machine Line

• Manufacturer: Rainbow

Product Description We can give design and solution for all industries which require electroplating,zinc coating or hot dip galvanizing equipment. We will design the electroplating,zinc coating or hot dip galvani...

Steel Pipe and Coil Galvanize Equipment

• Manufacturer: MH

I. customer requirements The design is simple and practical, which meets the requirements of the section steel of solar support.The thickness of the strip is 0.8-4mm, the width of the strip is less than 500mm, th...