Processing » Foundry & Casting

Search By Manufacturer

Search By Country

Building Filters

39

Used foundry liquidation

  • Walworth W928 Liquid Check Valve,

    Walworth W928 Liquid Check Valve, 18", Cast Iron/Bronze, #100734

    • Manufacturer: WALWORTH

    “New Surplus” Comments: Flat-faced flanges MULTIPLES IN STOCK THIS ITEM QUALIFIES FOR SAME DAY SHIPPING SUBJECT TO PRIOR SALE All shipping is determined per item. Contact us with your shipping information for a q...

    $3,295 USD
    Johnson City, TN
  • Walworth W928 Liquid Check Valve,

    Walworth W928 Liquid Check Valve, 18", Cast Iron/Bronze, #100735

    • Manufacturer: WALWORTH

    “New Surplus” Comments: Flat-faced flanges MULTIPLES IN STOCK THIS ITEM QUALIFIES FOR SAME DAY SHIPPING SUBJECT TO PRIOR SALE All shipping is determined per item. Contact us with your shipping information for a q...

    $3,295 USD
    Johnson City, TN
  • EATON 4.TFN, Type T Gas/

    EATON 4.TFN, Type T Gas/ Liquid Seperator. 4" Flanges, Cast Iron - USED

    • Manufacturer: Eaton

    USED EATON 4.TFN, Type T Gas/ Liquid Seperator. 4" Flanges, Cast Iron, Horizontal Flow Item is guaranteed to not be DOA for replacement or refund within 30 days of receiving. Item is sold as pictured. The item yo...

    $855 USD
    Kawkawlin, MI
  • Yamada DP-50BFE-HD-AP Air Operated Diaphragm

    Yamada DP-50BFE-HD-AP Air Operated Diaphragm Pump, Cast Iron, NPT Flange

    • Manufacturer: Yamada

    Yamada DP-50BFE-HD-AP Air Operated Diaphragm Pump, Cast Iron, NPT Flange Diaphragm Pump Made Out Of Cast Iron Pump Specifications: Yamada Pumps DP-50BFE-HD type, model 854452 DP-50 XDP series, air operated double...

    Watertown, CT
  • DAYTON 4YKP5 1/3-HP Self Priming

    DAYTON 4YKP5 1/3-HP Self Priming Centrifugal Transfer Pump 115/230V Cast Iron

    • Manufacturer: Dayton

    Stantec Sales & Services is offering the following item: DAYTON 4YKP5 1/3-HP Self Priming Centrifugal Transfer Pump 115/230V Cast Iron 1.5" Inlet and outlet. Max Liquid Temp 180 degrees F. All products...

    $600 USD
    Lenapah, OK
  • Trusted Seller
    Liquid iron analyser Digitemp-E

    Liquid iron analyser Digitemp-E

      Brand: Electro-Nite, Type: DTE-A-50; Serial number: 014402 Exterior dimensions: Length 240mm x Wide 200mm x Height 145mm Power 21VA With foot for cups with last Calibration certificat in german

      Amel, Belgium
    • Trusted Seller
      Liquid iron-steel analyser HERAEUS Quick

      Liquid iron-steel analyser HERAEUS Quick Lab

      • Manufacturer: Heraeus - Hanau - Vötsch

      Type : Digitemp E QLE-DTE ASO for wall mounting for carbon and silicon analysis With "cup" holder External dimensions: Length: 440mm, Wide: 200mm, Height: 160mm Power 21VA Line 230 VAC/50-60Hz

      Amel, Belgium
    • Trusted Seller
      Ingot 10 steel trestles for

      Ingot 10 steel trestles for residual liquid max +- 400 C°

        10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...

        Amel, Belgium
      • Trusted Seller
        Core sand mixing installation STEFFENS

        Core sand mixing installation STEFFENS ±2t/h

        • Manufacturer: STEFFENS

        System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

        Amel, Belgium
      • Trusted Seller
        Gasing unit LÜBER LW-FDA-825; 8kW

        Gasing unit LÜBER LW-FDA-825; 8kW

        • Manufacturer: Lüber
        • Model: LW-FDA 825

        With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

        Amel, Belgium
      • Trusted Seller
        Gasing unit LÜBER LW-FDA-825; 8kW

        Gasing unit LÜBER LW-FDA-825; 8kW

        • Manufacturer: Lüber
        • Model: LW-FDA 825

        With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

        Amel, Belgium
      • Trusted Seller
        2002 Gravity die casting machine

        2002 Gravity die casting machine IMR C60X

        • Manufacturer: IMR

        Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

        Amel, Belgium
      • Trusted Seller
        2012 Gravity die casting machine

        2012 Gravity die casting machine IMR C40H

        • Manufacturer: IMR

        Dimensions: Length: 2170mm; Width: 1916mm; Height: 1660mm 6KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS control Pressure 45-55bar

        Amel, Belgium
      • Trusted Seller
        Sand cooler - classifier (fluid)

        Sand cooler - classifier (fluid) OMEGA G12, throughput ± 10 t/h

        • Manufacturer: Omega

        Dimensions: Length: ±3180 mm; Width: ±1500 mm; Height: ±2600 mm Fan: 5,000 m²/h – Air extraction: 6400 m³/h

        Amel, Belgium
      • Trusted Seller
        Gasing unit LÜBER LW-FDA-825; 8kW

        Gasing unit LÜBER LW-FDA-825; 8kW

        • Manufacturer: Lüber
        • Model: LW-FDA 825

        With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

        Amel, Belgium
      123

      Overview

      Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

      FAQ

      What should I consider when buying used foundry and casting equipment?

      Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

      How do I ensure the safe shipping of foundry and casting equipment?

      Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

      What is the maintenance schedule for foundry and casting equipment?

      Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.