Used ms

2005 TOSHIBA DC800J-MS

• Manufacturer: Toshiba
• Model: DC800J-MS

INCLUDES: 802 QUENCH TOSHIBA 802 TRIM PRESS TOSHIBA Die Locking Force: 8,000 kN (approximately 800 metric tons) Injection Speed: 0.05 to 6.5 meters per second Tie-Bar Spacing: 930 mm x 930 mm Mold Thickne...

TOSHIBA 250 hp, 4000 volts, 713 rpm, D509Z AC Induction Motor – Motors Electric Motors AC/DC – AC , 250 hp, 4000 volts, 3-phase , 713 rpm, D509Z

• Manufacturer: Toshiba
• Model: DC250
• Phase type: Three-phase

Current type: AC | Horsepower: 250 hp | Voltage: 4000 volts | Phase: 3-phase | Rpm: 713 rpm | Frame: D509Z

Vibrating chut JOST 1800 x 250mm

• Manufacturer: Jöst

With magnetic driving, without regulation Type mris ms, serial number: 8795MS | In good condition, weight: 150 kg | Outside dimensions: 2100 x 500, h. 600 mm | Useful dimensions: 1800 x 250, h. 200 mm

2008 Magnetic vibrating conveyor, 1700 mm x 510 mm x 180 mm

• Manufacturer: Magnetek

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Magnetic vibrating conveyor 1700mm x 510mm x 180mm

• Manufacturer: Magnetek

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Magnetic vibrating conveyor 1700mm x 510mm x 180mm

• Manufacturer: Magnetek

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Magnetic vibrating conveyor 1700 mm x 510 mm x 180 mm

• Manufacturer: Magnetek

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Vibrating chut JOST, length 1500mm, Ø 200mm

• Manufacturer: Jöst

Type: MS5-20-10, Serial number: 19047 Motor: 520 C, Serial number: C12/3, 5,2 A, 50 Hz, 380 V Conveyor width 200 mm, h. 180 mm

Vibrating conveyor 2590 x 670mm, VIBRATECHNIK

Type: M5006, weight: 700 kg Vibrating motor VIBRATECHNIK type MS310E M1AC4BL, serial number: 8207215 2 x 2,2 Kw, 220/380 V, 980 rpm

Toshiba DC350 J-SX Die Casting Machine Year 2010

• Manufacturer: Toshiba
• Model: DC350J-SX

Die locking force: 3500 kN (357 ton) | Injection speed: 0.1–7.0 m/sec | Tie-bar spacing (h × w): 650 × 650 mm | Die height: 700–300 mm | Die stroke: 420 mm

E-PRESS series

• Manufacturer: LK

E-PRESS is a cold-chamber die casting machine newly developed by LK over a period of two years. It has cracked multiple key technologies, met customer demands and industry development, and is positioned at the hi...