Processing » Foundry & Casting

Building Filters

30

Used turning table

Trusted Seller
Core shooter RÖPER 2,5 l, turning table - automatic D1A
- Manufacturer: Laempe / Röperwerk
3-station turntable machine Simultaneous shooting and gassing As soon as the firing is finished, the automatic door opens and the operator can pick up the cores. With new NORGREN valve block With new SIEMENS TIA ...
Amel, Belgium
Trusted Seller
1650X1280 Turned cast iron surface plate
- Manufacturer: 1650X1280
Upper surface with threaded holes - Height above ground 1170 mm Turned upper plate 90°
Collegno, Italy
Trusted Seller
Auction
SCHIESS - 16 DSC 150 - Turning Pallets Exchange System
- Manufacturer: Schiess Froriep
Make: SHOOT Model: 16 DSC 150 Year of manufacture: 1989 Retrofit: CNC Siemens 840D (2006) Control: Siemens 840D CNC Machine type: Pallet exchange system for vertical lathes Condition: Very good – includes dedicat...
Ljubljana, Slovenia
Visit Auction Website
Auction
SCHIESS - 16 DSC 150 - Turning Pallets Exchange System
- Manufacturer: Schiess Froriep
- 3× Table diameter (manual clamping jaws): 1,500 mm - Permissible load per table (with pallets): 2.5 t - Transfer rails - Transfer wagon - 3 pallet exchange stations - 1 pallet positioning station
Ljubljana, Slovenia
Visit Auction Website
Trusted Seller
Cast iron clamping table - 1630/420/H180 mm 25218
- Manufacturer: Guss
Clamping table, Clamping angle, T-slot table, Rotary table, Milling machine table, Turning table -Weight 461 kg
Wiefelstede, Germany
Trusted Seller
Turningtable Coreshoter Röper D1A / 2,5l
- Manufacturer: Laempe / Röperwerk
External dimensions: Lenght: 1750mm; Width: 1360mm; Hight: 1900mm shot capacity 2,5l with turning table 3 positions with older controlboard with energency stop
Amel, Belgium
Trusted Seller
1989 Semi-automatic moulding plant HWS-HSP-2
- Manufacturer: HWS-Sinto
With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel
Amel, Belgium
Trusted Seller
1987 Carousel core shooter, 4 stations, RÖPER, 16 l
- Manufacturer: Laempe / Röperwerk
Electric heating 20 s /core For core box 510 mm x 760 mm, h. 400 mm With horizontal and vertical seal Turning table with 4 tightening mechanisms in aluminium
Amel, Belgium
Trusted Seller
Grinding Cabin ±4,4×2,3×2,5m with manipulator max 750kg
- Manufacturer: Universal
Cabine dimensions: Lenght 4400mm; Width: 2300mm; Hight: 2500mm (plus ± 40cm for suction connection) Manipulator dimensions: Lenght: 2300mm; Width: 1500mm; Height: 1020mm /mouvements : table turning and swivel arm...
Amel, Belgium
Trusted Seller
Moulding machine OSBORN , type 719RF
- Manufacturer: OSBORN,
Tightening: 183 mm, turning out: 330mm, Overhauled, with new twohands control.
Amel, Belgium
Trusted Seller
Jolt squeeze moulding machine BMD; ARPA 300
- Manufacturer: BMD
Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;
Amel, Belgium
Trusted Seller
Jolt squeeze moulding machine BMD; ARPA 300
- Manufacturer: BMD
Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;
Amel, Belgium
Trusted Seller
Rotating molding machine KÜNKEL WAGNER WPM3
- Manufacturer: Künkel Wagner
- Model: WPM 3
Dimensions: Length: 2850mm; Width: 1400mm; Height: 2300mm With control cabinet With control panel
Amel, Belgium
Trusted Seller
Rotating molding machine KÜNKEL WAGNER WPM3
- Manufacturer: Künkel Wagner
- Model: WPM 3
Dimensions: Length: 2850mm; Width: 1400mm; Height: 2300mm With control cabinet With control panel
Amel, Belgium
Trusted Seller
Moulding machine OSBORN, type 719 RF
Machine jolts under pressing Overhauled with new twohands control
Amel, Belgium

12

Overview

Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

FAQ

What should I consider when buying used foundry and casting equipment?

Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

How do I ensure the safe shipping of foundry and casting equipment?

Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

What is the maintenance schedule for foundry and casting equipment?

Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.