Used Foundry & Casting in Wallonia, Belgium

Trusted Seller
2008 Fettling Centre MAUS SAM300 S
- used
- Manufacturer: Maus
Cast part: length 300mm, width 300mm, height 250mm, Ø 360mm, weight 15 kg With 1 vertical cutting/grinding disc With 1 vertical grinding disc With 1 inside grinding tool
Amel, Belgium
Trusted Seller
Permeameter SIMPSON
- used
- Manufacturer: Simpson
Dimensions: Length: 260mm; Width: 330mm; Height: 430mm 220V;50Hz;0,1A Suitable for the following processes: Cold Box Core oil Clay-bonded sand Hot Box Nobake/Air blower Shell/Croning (sand for cast mould shells a...
Amel, Belgium
Trusted Seller
Pneumatic slag gripper
- used
Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws
Amel, Belgium
Trusted Seller
Moulding line for chemical sand FDC/AXMANN
- used
- Manufacturer: Axmann
With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...
Amel, Belgium
Trusted Seller
Bottom pouring ladle with planetary gear, 8 t
- used
Brand: FOUNDRY SERVICE, serial number: 4827 With one bottom pouring device ,with out horizontal arm and plug bar are not inclluded With 2 pouring spouts
Amel, Belgium
Trusted Seller
Silicone moulding press for centrifuge, 2 x 350mm
- used
Brand AB, type: S2000, serial number: TRF2/350 Giri 300-700 Pneumatic press with 2 swivel tables Ø 350 mm For silicone pattern discs For centrifugal casting of small parts like jewellery, figurines, medals, etc.
Amel, Belgium
Trusted Seller
Degassing unit (impeller) BOMA
- used
- Manufacturer: BOMA
Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...
Amel, Belgium
Trusted Seller
2000 Mobile hydraulic wedge station HOLMATRO
- used
- Manufacturer: Holmatro
Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer
Amel, Belgium
Trusted Seller
2000 Mobile hydraulic wedge station HOLMATRO
- used
- Manufacturer: Holmatro
Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer
Amel, Belgium
Trusted Seller
2009 Amine Gas Washer BGT, 9000 m³/h
- used
- Manufacturer: BGT
Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm
Amel, Belgium
Trusted Seller
2007 Manipulator CLANSMAN, Type C620RB
- used
- Manufacturer: CLANSMANN
Payload: 500kg | Max opening of the tongs: ±1000m | Horizontal speed: 0.9m/s | Vertical speed: 1m/s | Swivelling speed: 60°/s | Hydraulic power: 22kW
Amel, Belgium
Trusted Seller
Sand silo, divided in 2; ±6m³
- used
Silo divided into 2 with 2 separate outlets On 3 feet
Amel, Belgium
Trusted Seller
Magnetic steerer RETSCH with heating
- used
- Manufacturer: Retsch
Dimensions: Length: 150mm; Width: 200mm; Height: 120mm 630W; 220/240V; 50Hz; Temperature adjustable with rotary button
Amel, Belgium
Trusted Seller
Sand silo trio 2 x ±35m³; 1x ±46m³
- used
- Manufacturer: HOLTEWERT / Dynasys
Consisting of 3 silos Space requirement: Length: ±10m; Width: ±2.5m - Large silo Dimensions: Total height: 14806mm; Ø3200mm Usable dimensions: Hopper height: 1574mm; Cone height: 6020mm - 2 x smaller silo Dimensi...
Amel, Belgium
Trusted Seller
2010 Pneumatic conveyor 30l HENSEL with small hopper
- used
- Manufacturer: HENSEL
Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor
Amel, Belgium