Used Foundry & Casting

2018 Thermtronix GT-3000

• Manufacturer: Thermtronix

Gas Fired Aluminum Furnace w/ Hyd Tilt Function and 02 Crucibles per Furnace. Melt Rate Per Hour 850/1250 lbs. at 1300F Fully Automatic Power and Temp Control UL Listed and Flame Safety Controls Computer Designed...

Watts 007 Cast Iron Double Check Valve Backflow Preventer Assembly Size 3"

• Manufacturer: Watts

“NEW WITHOUT BOX. IN GOOD CONDITION. SEE PICTURES ATTACHED” Watts 007 Cast Iron Double Check Valve Backflow Preventer Assembly Size 3" Watts 007 Cast Iron Double Check Valve Backflow Preventer Assembly Size 3" Th...

Roper 7-1/2" X 6" Cast Iron Belt-Driven Cavity Pump

• Manufacturer: Unbranded

“HAS A PIECE THAT BROKE OFF THE BELT DRIVE” Roper 7-1/2" X 6" Cast Iron Belt-Driven Cavity Pump Roper 7-1/2" X 6" Cast Iron Belt-Driven Cavity Pump 18″ DIAMETER V-BELT DRIVE w/ 1/2″ WIDE V-BELT GROOVES Shipping S...

CAST IRON

• Manufacturer: CAST IRON

SINGLE PLATE ONLY - NOT A PAIR INSPECT IN OUR NEW JERSEY WAREHOUSE

Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI

“UNTESTED, REFER TO PICTURES FOR CONDITION.” Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI THE LAST PICTURE IS ONE O...

NEW FALK 1425WBQM1B-15AC219 CAST IRON WORM STOCK S-290

• Manufacturer: Falk

NEW FALK 1425WBQM1B-15AC219 CAST IRON WORM STOCK S-290

ANGLE PLATES CAST IRON

• Manufacturer: ANGLE PLATES

(2) 37.75" x 18" x 19.5" T-SLOTTED ANGLE PLATES SPECIFICATIONS: EQUIPPED WITH: - T-SLOTTED BOTH HORIZONTALLY & VERTICALLY INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE

Floor Plate, T-Slotted, 60" x 218" x 10" Cast Iron

• Manufacturer: Mfr. N/A

Equipped With: Cast Iron Construction NOTES: Inspect In Our Philadelphia PA Warehouse

AMT 4786-95 Cast Iron Self-Priming Sprinkler Pump 3/2HP 3450/2850RPM 3PH

• Manufacturer: AMT

“UNTESTED.” AMT 4786-95 Cast Iron Self-Priming Sprinkler Pump 3/2HP 3450/2850RPM 3PH AMT 4786-95 Cast Iron Self-Priming Sprinkler Pump 3/2HP 3450/2850RPM 3PH 1″ X 2″ MALE THREADS Shipping Shipping cost: Calculate...

Clausing CAST IRON w/PRECISION GROUND TOP

• Manufacturer: Clausing

CAST IRON WORK TABLE FOR CLAUSING DRILL PRESS WORK SURFACE - 20" x 30" COOLANT TROUGH IS AN ADDITIONAL 2.5" ALL AROUND TOTAL SIZE IS 25" x 35" OVERALL COMES WITH HARDWARE FOR MOUNTING IT TO A BOX TABLE (IT WAS US...