4” MITTS & MERRILL/ FROMAG, Mdl. RA CNC 100/750, CNC KEYSEATER
- Manufacturer: Fromag
4" FROMAG/ MITTS & MERRILL CNC KEYSEATER; MODEL: RA CNC 100/750 SER #46701 ASK3348-4 YEAR: 1990 SPECIFICATIONS: MAXIMUM KEYWAY WIDTH: 1/8" TO 4" MAXIMUM KEYWAY LENGTH: 30" BORE DIAMETER: 1/2" TO 20" FEED RATE:...
Casa Grande, AZ
1971 FROMAG RA50/425
- Manufacturer: Fromag
FROMAG Slotting Machine Type:RA50/425 Year:1971 Max thickness:50mm Max working length:425mm Machine weight:2000kg Please Note: The above information has been obtained to the best of our ability and belief, ...
Belgium- Trusted Seller
Fromag KZH 50/375
- Manufacturer: Fromag
max width of groove: 3 50 mm max length of groove: 375 mm bore diameter: 13 500 mm table: 575 x 400 mm tools included Keilnuten - Ziehmaschine
Deinze, Belgium - Trusted Seller
1962 Frömag KZ-22
- Manufacturer: Fromag
groove width 6-20 mm drawing length - mm working speed - m/min total power requirement 3 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 0,7 x 1,6 m No. 0319 Grooving machine with various dr...
Gorxheimertal, Germany - Trusted SellerAuction
FROMAG - KZM 32/300 - keyway grooving machine (broaching machine) - 1970
- Manufacturer: Fromag
FROMAG KZM 32/300 • Maximum stroke: 300 mm • Groove width: 32mm • Type: KZM32/300 • Operating mode: hydraulic • Condition: used • Remarks: truck loaded machine
Oise, FranceVisit Auction Website - Trusted Seller
Fromag H90/700 Hydraulic Key Seater
- Manufacturer: Fromag
Capacity: 3 90 mm Bore Diameter:13 500 mm Component length:700 mm Table size: 595x 400 mm Stroke: 700 mm Speeds: 914 7315 mm/min tools and accessories included Keilnuten - Ziehmaschine
Deinze, Belgium - Trusted SellerAuction
FRÖMAG - KZ 90/500 - 1957 - Slot milling machines
- Manufacturer: Fromag
Machine must be dismantled by yourself! A 10 ton overhead crane is available
Mittenaar, GermanyVisit Auction Website - Trusted Seller
Fromag - RA CNC-E 32/425
Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min
Babberich, Netherlands 
Tools suitable for Frömag Combi Rapida D125/1500
- Manufacturer: Fromag
Large set of tools for both keyways and splines. about 65 different variants.
Värnamo, Sweden1965 Frömag ISR 8/1000
- Manufacturer: Fromag
Pull length: 1000 mm | Speed: 05-7 m/min | Return speed: 15 m/min | Table: 360x400 mm | Hole in the table: Ø100 mm | Engine: 5,5 kW | Length: 650 mm | Width: 1300 mm | Height: 2950 mm
Värnamo, Sweden- Trusted Seller
1994 FRÖMAG HSR 9/1000
- Manufacturer: Fromag
vert. (Groove) broaching machine with tool Pressure capacity (to): 9 | Working length (mm): 1000
Metzingen, Germany 
1980 Frömag Combi Rapida D 125/1500
- Manufacturer: Fromag
- Power requirement: 6.1 kW
Tool conveyor, chip conveyor and extraction. Tools see Stock No: 290552
Värnamo, Sweden
Tools suitable for Frömag Combi Rapida D125/1500 290552
- Manufacturer: Fromag
Wide range of tools for key seats and splines. Appx. 65 sets.
Värnamo, Sweden1965 Frömag ISR 8/1000 290348
- Manufacturer: Fromag
- Stroke length: 1,000 mm
Stroke: 1000 mm | Capacity: 8 ton | Speed: 05-7 m/min | Return speed: 15 m/min | Table: 360x400 mm | Table bore: ø100 mm | Motor: 5,5 kW | Length: 650 mm | Width: 1300 mm | Height: 2950 mm
Värnamo, Sweden- Trusted Seller
FROMAG RAPIDA 50/425 HYDRAULIC KEYSEATING MACHINE
- Manufacturer: Fromag
Keyway width 3 ÷ 50 mm. Min./Max. working Ø 13 ÷ 400mm. Complete with: - tooling
Arluno, Italy
Tip: Enter manufacturer, model or keyword
