Building Filters
- Trusted Seller

Table, S/st, 32" x 68", Receiving, Packing #S741313
- Manufacturer: Other
Stainless steel receiving/packing table, 32" x 68", with 6" sidewalls and 6-1/4" end discharge. Mounted on stainless steel/clear plastic caster frame. Previously used for packing fruit.
San Dimas, CA - Trusted Seller

Screen, Rotary, 24" x 8', S/st, FEMIA #A744157
- Manufacturer: Femia
FEMIA Rotary Screen. Features a 24" diameter and an 8' long stainless steel drum with 6' of screening area and zig-zag openings of 3/16". Previously used in a vegetable processing facility.
California, USA - Trusted Seller

Conveyor, Belt, 20" x 66", S/st, Incline, Dewatering #S743099
Stainless Steel Dewatering Belt Conveyor, includes Honeycomb flat wire open mesh belt, Inclined Conveyor. Measures 20" wide X 66" long with 50" discharge height , 44" infeed. Belt driven by 1/2 HP, 230/460 V, 3/6...
San Dimas, CA - Trusted Seller

Cutter, Stem, Chili Peppers, S/st, (2) Perforated Drums #C744823
Stainless Steel Chili Pepper Stem Cutting machine. Includes (2) perforated rotary drums, with top drum conveying in one direction, feeding into bottom drum and conveying product in the opposite direction to the d...
San Dimas, CA - Trusted Seller

Cutter, Carrot, Garroutte, S/st, #C258707
- Manufacturer: Garoutte
Garoutte tipper/topper cutter. Includes (2) 10" diameter sawtooth blades on 4" centers driven by 1/2 HP 1800 RPM motor. Cutter is fed by 6" wide nylon tabletop chain with 7" wide cleats (12" wide bed), 7' long co...
Brisbane, CA - Trusted Seller

Evaporator, 1 Effect, 300 PPH, 316 S/st, Rising Film #S743810
Single effect rising film evaporator with 60 sq ft steam chest and 316 stainless steel contact parts. Rated for 300 lbs/hr evaporation. Suitable for batch or continuous use. Previously used for concentrating medi...
San Dimas, CA - Trusted Seller

Pulper, Finisher, Langsenkamp, Mdl 185, S/st, 1 HP, Paddle #S738909
- Manufacturer: Langsenkamp
Langsenkamp Paddle Finisher, Model 185, Serial Number 3322 - Features bronze and stainless steel contact parts, mounted on a cast aluminum frame. Powered by a 1 HP motor with 200/230/460 Volt, 1725 RPM drive.
San Dimas, CA - Trusted Seller

Peeler, Lyco, Mdl 7000, S/st, 500-20000 Pounds per hour #S742123
- Manufacturer: Lyco Mfg Inc
Peeler, Lyco, Mdl 7000, stainless steel, 500-20000 Pounds per hour. Lyco Mfg Inc peeler, model 7000 with output capacity of 500 to 20,000 lbs/hr depending on application. Unit is stainless steel construction has ...
San Dimas, CA - Trusted Seller

Feeder, Vibratory, 10" X 43", S/st, #C736618
- Manufacturer: Syntron
Vibratory feeder, 10" wide x 43" long, stainless steel contacts. Includes stainless steel slotted section (sizing section), 3/4" spacing between slots. Complete with 8" x 8" undersize discharge section in bottom ...
Brisbane, CA - Trusted Seller

Washer, Rotary, Odenberg, 48" x 7', S/st, Less Drive, #S741831
- Manufacturer: Odenberg
Odenberg rotary washer, drum measures 48" diameter X 7' long, stainless steel construction, includes internal screw, screen has 1/2" x 1" slotted opening, 24" x 21" flanged discharge. Drum mounted on tire/trunnio...
Chowchilla, CA - Trusted Seller

Dicer, Promax, Mdl PXD1000, S/st, 1.5 HP, #S742911
- Manufacturer: Promax
Promax Model PXD1000 dicer, includes 4" x 4" opening thru knife grate assembly with approximately 3/4" x 3/4" cube openings leading to 12" x 4" x 1/4" thick curved slicing blade. Discharge outlet measures 13" x 5...
Chowchilla, CA - Trusted Seller

Peeler, Lyco, S/st, Washer, Mdl 7000 Scrubber #C744144
- Manufacturer: Lyco
Lyco Model 7000 Scrubber, Peeler/Washer, chamber measures 18" diameter X 80" long with 18" diameter screw to convey product through chamber. Includes 5" diameter brush rollers. Previously used scrubbing apples. F...
Brisbane, CA - Trusted Seller

Cutter, Vegetable, Paxton, Mdl Chef 400 MN, S/st, #C736961
- Manufacturer: Paxton
Vegetable cutting machine, manufactured by Paxton, Model Chef 400 MN, serial number A0209002. Includes rotating cutting head with small perforations and (2) feed sections. One feed section measures 3" x 6" x 5" d...
Brisbane, CA - Trusted Seller

Mill, Disintegrator, Corenco, Mdl M8E, S/st, 8", 5 HP #A743374
- Manufacturer: Corenco
Corenco Model M8E disintegrator mill, gravity fed disintegrator / hammer mill / grinder. Driven by 5 HP motor with VFD controller. Complete with stainless steel custom feed hopper, leading to grinding chamber. De...
California, USA - Trusted Seller

Feeder, Vibratory, 12" X 30", S/st, Electro-Magnet Driven, #C736616
Vibratory feeder, 12" wide x 21" long flat section, leading 12" wide x 9" long declined discharge, includes 7" high flared sidewalls, electromagnetically driven. Unit does not have a mounting base, and requires a...
Brisbane, CA
