Used conveyors in Spain

S/S DIRECT STEAM LINEAR BLANCHER, LENGTH: 6.23 M

Continuous steam blancher with paddles stainless steel conveyor. Blanching sizes: Belt width: 58.5 cm Height of product entrance: 1.40m Height of product exit: 1.25 m

MACONSE 44082

• Manufacturer: Maconse

THE FUNCTION OF THE PASTEURIZER-COOLER IS TO PASTEURIZE IN A FIRST PHASE THE PROCESS AND GO COOLING PAULATINALLY IN THE REST OF THE PROCESS. INCORPORATES: - 3 BASINS AND 3 CENTRIFUGAL PUMPS: Useful measurements: ...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

S/S VMK LUNG FEEDER. UNLOADING: 1.80 M

• Manufacturer: VMK

Feeder hopper with elevator constructed with perforated mesh and alternating blades for product elevation. Stainless steel trough with direct feed to the elevator conveyor. Incorporates canvas conveyor belt. WORK...

FRATELLI INDELICATO POLYCITRUS EXTRACTOR

• Manufacturer: FRATELLI INDELICATO

Height: 2.65 m | Included: CONVEYOR BELT | Useful width: 0.00 m | Length: 2.00 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Power: 22 CV / 16 KW

INPROMAR INP/GLI 20 30

• Manufacturer: INPROMAR

MODULAR BELT DIMENSIONS Width: 80 cm. Separation between paddles:41 cm. Paddle height: 7.5 cm. Unloading: 1.65 m.

ENOVENETA TOP 15R

• Manufacturer: ENOVENETA

The TOP model destoner/crusher has a hopper with a motorised feed screw and speed regulator to dispense the correct amount of product according to the speed of the beater shaft. The rear of the machine can be eas...

JBT 3566

• Manufacturer: JBT

Height: 4.00 m | Included: 1.80 m | Useful width: 0.00 m | Length: 4.30 m | Weight: 0 Kg | Production: 8000 KG/H | Made of: STAINLESS STEEL | Frequency: 50 HZ | Voltage: 380 V | Suitable for: INDEPENDENT FULL BA...

GRUPO HRG BELT, 9 SEATS

• Manufacturer: Grupo HRG

Gutting and washing belt for cephalopods (squid, octopus, etc.). INCORPORATES: - 1 Modular conveyor belt for waste. - 1 Modular conveyor belt for clean product.

GRUPO HRG CP 3300

• Manufacturer: Grupo HRG

The slicing machine is a machine designed for slicing the tentacles of cephalopods. The machine is equipped with: - An upper conveyor belt of slats, on which the product to be sliced is transported. - It has a se...