Used Conveyors in Wallonia, Belgium

Vibrating elevator conveyor REMEX outlet height 4150 mm

Type : Tu 206-850, serial number: 961149 Conveyor lenght ± 60m with water cooling Tube Ø 42mm

Steep conveyor belt HEIDELBERGER

• Manufacturer: Heidelberg

Useful dimensions: total width of the band 500 mm, useful width 300 mm Gearmotor BAUER, 3 hp, 1420 /91 rpm, 220/380 V

Steep conveyor belt for chips

Dimensions: Length: 1100mm; Width: 640mm; Height: 900mm 0,25kW On wheels Belt consisting of metal plates

Conveyor - Groninger - MRT 105 - DK2105.WG

• Manufacturer: Groninger

Belt conveyor 800/475 mm

Gearbox LEROY SOMER, 4 kW, 220/380 V, 1425/11,82 rpm For pieces, sand, waste With security lines

Alimentation UPS, Feeding UPS, Conveyor - DK2277.WG

Belt conveyor 3100 x 800mm

Drum motor BAUER Without iron feet where the belt above or below runs Conveyor more or less well Belt width 970 mm, Ø 220mm

Rubber belt conveyor for cores ± 31,5m

Dimensions : Longueur : ± 31500mm ; Largeur : 850mm ; Hauteur : 1150mm Dimensions utiles : longueur : 31500mm ; largeur : 645mm ; hauteur utile : 900mm With on/off switch With emergency stop switch 2.2kW;380V Bel...

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

Step belt conveyor (cleated belt) 5000 mm

Gearmotor ABM Drum wheel Ø 220 mm Cleats distance 360 mm Chain drive

Screw conveyor 3420 mm , Ø 150 mm

Motor BAUER, type : DKF942H241; 1,5 kW; 2 hp; 1420/64 rpm; 380 V Axle base between entrance and exit 3420 mm Entry Ø 280 mm With a clip on the back for hanging

Screw conveyor 2930 mm, Ø 150 mm

Gear motor BAUER; Type DKF941A/241; 1,5 kW; 2 hp; 1420/158 rpm; 380 V Axle base between entrance and exit 2930 mm Inlet flange Ø 300 mm With 3 holes for looking With a clip on the back for hanging

Rubber belt conveyor, width 50 0mm

Drum motor ABM, 0,75 KW, 1 hp, 220/380 V In good condition Band width: 500 mm, center distance: 2550 mm, on 4 rubber wheels Adjustable in the height, can swing right and left

Belt conveyor, 5000 mm x 400 mm

1,5 kW, 220/380 V Tube construction Outside dimesions: 6400 mm x 550 mm, h. 400 mm | Inside dimesions: 5000 mm x 400 mm | Speed: ± 1m/s