[BANK OF 8] DENVER DR-8 FLOTATION CELLS
- Manufacturer: Denver
Description (3) 3 HP, 1800 RPM motors (2) 1.5 HP, 1800 RPM motors
Canada
40′ X 25′ FLSMIDTH GEARLESS SAG MILL, 26,000 KW
- Manufacturer: FLSmidth
Description Manufacture and Design 40′ (12,192 mm) diameter 25′ (7620 mm) length Designed for 26,000 KW wrap-around motor * Note: motor NOT included
Netherlands- Trusted Seller
UNUSED METSO 36' x 20.5' (11m x 6m) SAG Mill, 15,000 kW (20,107 HP) Gearless Motor Drive, 50 Hz
- Manufacturer: Metso
UNUSED METSO 36' x 20.5' (11m x 6m) SAG Mill, 15,000 kW (20,107 HP) Gearless Motor Drive, 50 Hz 15,000 kW (20,107 HP) ABB Gearless Motor Drive, 50 Hz Preserved & Stored Indoors in Europe All OEM Original Technica...
Europe - Trusted Seller
9 Units - UNUSED METSO OUTOTEC LAROX Model CC-144 Vacuum Disc Filter (9 Units Available)
- Manufacturer: Metso
Diameter : Length : Number of Discs : 9 Units - UNUSED METSO OUTOTEC LAROX Model CC-144 Vacuum Disc Filter
Europe - Trusted Seller
MORGARDSHAMMAR (METSO) 19.35' X 27.88' (5.9M dia X 8.5M) AG/SAG/Ball Grinding Mill 3,753 HP (2,800 KW) 50 HZ
- Manufacturer: Metso
MORGARDSHAMMAR (METSO) 19.35' X 27.88' (5.9M dia X 8.5M) AG/SAG/Ball Grinding Mill 3,753 HP (2,800 KW) 50 HZ Can Operate as Low Aspect Ratio AG/SAG or Ball Mill (2) 1400 kW, 50 Hz Motors Manufactured by MORGARDSH...
Europe - Trusted Seller
UNUSED FLSMIDTH 40' x 25' (12m x 7.6m) Gearless SAG Mill
- Manufacturer: FLSmidth
UNUSED FLSMIDTH 40' x 25' (12m x 7.6m) Gearless SAG Mill Gearless Mill
Europe - Trusted Seller
Gemeni GT1000 MK.2 Gold Concentrating Table
- Manufacturer: Mineral Technologies
General Model Specifications: Overall Dimensions: Series: Gemeni Table Mark 2 | Serial: 502 | Capacity: 1,000 Lbs Per Hour (455 Kg per Hour) | Feed size: 800-1000 Microns | Feed density recommended: 60-70% Solids...
Europe - Trusted Seller
Denver DR #30 Flotation Cells
#30 DR-type. Bank of 2. 100 cu. ft. per cell. Sealed stand pipes and air header. Urethane impeller and diffusers. Paddle shaft. Dart valve assembly.
Savona, Canada 
38′ X 22′ EGL METSO GRATE DISCHARGE SAG MILL, 19,400 KW
- Manufacturer: Metso
Description Manufacture and Design 38′ (11.58 m) diameter 25’5″ (7.76 m) length, flange to flange Grate discharge Motor and Drive 19,400 KW Siemens wrap-around drive motor
Europe- Trusted Seller
Mill, Sag, 19.35' X 27.88', Morgardshammar, 1,877 HP, #D739653
- Manufacturer: Morgårdshammar
Morgardshammar pebble/sag mill, 19.35' (5.9 m) diameter x 27.88' (8.5 m) long, 2-1,877 hp (1,400 kW) motors. Currently configured as a grate discharge sag or pebble mill. No liners included. Units consists of: sh...
Finland 
Gerenzano, Italy
VER5033 – Andritz Disc Filter
- Manufacturer: Andritz
Disc Filter Completely overhauled by Andritz in 2011 Stopped in 2014 The capacity of the machine depends on the consistency. With the current configuration and temperature between 50-60 °C (and Schopper Riegler ...
Ravenna, Italy
VER5316 – Hedemora Disc Filter
- Manufacturer: Hedemora
Disc Filter Output consistency 8% Stainless steel Disc diameter: 3600 mm | Number of discs: 8 | Capacity: around 200 Tpd
Ravenna, Italy
VER4846 – New Disc Filter under construction
All stainless steel Suitable to filter water (from 0,1% to 0,3/0,4% fibers) 3 /h Twin filter visible in operation Excellent price
Ravenna, Italy- Trusted Seller
2008 Warman 423 DAH
- Manufacturer: Warman
Bentonite, Sand and Slurry Pump Motor power (kw): 55 | Engine manufacturer: SIEMENS
Rome, Italy
Tip: Enter manufacturer, model or keyword