Used Processing in Belgium

Trusted Seller
Andouart Ø 26 mm
- Manufacturer: Andouart
Extrusion of plastic tubes max Ø 26 mm screw Ø 60 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here S...
Deinze, Belgium
Trusted Seller
Andouart Ø 26 mm
- Manufacturer: Andouart
extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81...
Deinze, Belgium
Trusted Seller
Future Controls Ms-101 Injection mold-testing device
- Manufacturer: Future Controls Ms-101
Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2
Deinze, Belgium
Trusted Seller
Netstal N235-90MP injection moulding
- Manufacturer: Netstal
klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap
Deinze, Belgium
Trusted Seller
Auction
Collective Lot 20 x Shipping Containers and 6,000+ Parker Unused Air Filters
- Manufacturer: Parker
20 x Shipping containers of varying sizes, please see image and attached packaging list. The contents consist of filters from the supplier PARKER, delivered in storage in early 2014, and stored since then. Refere...
Antwerpen, Belgium
Visit Auction Website
Trusted Seller
Mobile mixer IMF 30-60t/h
- Manufacturer: IMF
Total dimensions: Length: 15960 mm; Width: 6720 mm; Height: 8500 mm With filter 6.500 m³/h (CAMFIL Farr) With compressor 500 l With SIEMENS S7-300 control system With tank for resin 1000 l and hardener 600 l With...
Amel, Belgium
Trusted Seller
Green sand mixer BMD TM240
- Manufacturer: BMD
Capacity: ±60t/h | Batch weight: ±1.5t | Cycle time: ±105s | Electrical power: ±250kW
Amel, Belgium
Trusted Seller
Moisture balance METTLER
- Manufacturer: Mettler - Toledo
Dimensions: Length: 320 mm; Width: 200 mm; Height: 270 mm Max weighing capacity: 360 g, min weighing capacity: 0.5 g
Amel, Belgium
Trusted Seller
Core shooter LAEMPE L40
- Manufacturer: Laempe / Röperwerk
External dimensions: Length: 3350 mm; Width: 3000 mm; Height: 3340 mm With new cabin Maximum core box size: Width: 1190 mm; Depth: 1000 mm; Height: 790 mm (for horizontal boxes) Maximum span: 1200 mm; minimum spa...
Amel, Belgium
Trusted Seller
Sand compactability tester GF; PVG
- Manufacturer: GF
Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm
Amel, Belgium
Trusted Seller
Polisher grinder MECAPOL PRESI, Ø 200mm
- Manufacturer: Presi
External dimensions: Length: 350 mm; Width: 380 mm; Height: 200 mm With water sprinkler With 7 additional plates
Amel, Belgium
Trusted Seller
Compressor ATLAS COPCO GA55FF 605m³/h
- Manufacturer: Atlas-Copco
- Model: GA 55
External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm
Amel, Belgium
Trusted Seller
Induction furnace INDUCTOTHERM 3 x 6t
- Manufacturer: Inductotherm
With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...
Amel, Belgium
Trusted Seller
Dust filter WAM 300m³/h
- Manufacturer: WAM GROUP
External dimensions: Length: 1500 mm; width: 1350 mm; height: 3000 mm 22 filter cartridges: Length: 740 mm Pneumatic cleaning
Amel, Belgium
Trusted Seller
2007 Sand feeder 31 liters, KLEIN
- Manufacturer: Klein
Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...
Amel, Belgium
Salvamac Trolley Dust Collector
- Manufacturer: Salvamac
- Model: Trolley
Good condition Salvamac Trolley Dust Collectors manufactured in 2021. Located in Belgium and other countries. Click request price for more information.
Belgium