- Trusted Seller
2021 ORION QSQ180D-E
used
- Manufacturer: Orion
Machine Specifications Non-CFC, heatless adsorption type air dryer ○Processing volume Dew point -20 to -40 degrees Celsius Inlet air volume 1.80 - 1.53m3/min Outlet air volume 1.54 - 1.27m3/min Dimensions Dimensi...
Tokyo, Japan - Trusted Seller
2005 MITSUBISHI 650MMGW-110
used
- Manufacturer: Mitsubishi
Screw dia: 90mm | Shot volume: 3140cm3 | Distance between tie rods: 1050x1050 | Mould thickness: 450x950 | Daylight opening: 1800mm
Chiba, Japan - Trusted Seller
2016 denyo dca-25lske
used
- Manufacturer: Denyo
- Model: DCA-25LSKE
Hours: 5650H | Specification: 20.0/25.0KVA. ENGINE: V2403
Chiba, Japan - Trusted Seller
2015 NISSEI FNX140Ⅲ-36A
used
- Manufacturer: Nissei
Screw dia: 50mm | Shot volume: 353cm3 | Distance between tie rods: 510x510
Chiba, Japan - Trusted Seller
1996 TADANO LS-106A
used
- Manufacturer: Tadano
- Model: LS-106A
We accept repainting. Please feel free to contact us if you have a request for replacement or repair of this machine or parts.
Chiba, Japan - Trusted Seller
2016 AIRMAN PDS670SD-4C5
used
- Manufacturer: Hokuetsu Kogyo
Hours: 3531H | Specification: 0.7MPa.TRAILER TYPE
Chiba, Japan - Trusted Seller
2005 TOSHIBA IS850GT-81A
used
- Manufacturer: Toshiba
- Model: IS850
Screw dia: 105mm | Shot volume: 4320cm3 | Distance between tie rods: 1060x1060mm | Platen size: 1530x1530mm | Daylight opening: 2250mm
Chiba, Japan - Trusted Seller
2005 NIIGATA ALL ELECTRIC MD450S-IV
used
- Manufacturer: Niigata
- Model: MD450
Screw dia: 76mm | Shot volume: 1588cm3 | Distance between tie rods: 810x810 | Daylight opening: 1550mm
Chiba, Japan - Trusted Seller
Chiba, Japan - Trusted Seller
2012 HAITIAN JU16000/31000J
used
- Manufacturer: HAITIAN
Screw dia: 90mm | Piston screw dia: 200mm | Shot volume: 33615cm3 | Distance between tie rods: 1550mm x 1450mm
Chiba, Japan - Trusted Seller
2001 JSW J150EⅢ
used
- Manufacturer: JSW
- Model: J150E
Screw dia: 46mm | Shot volume: 30cm3 | Distance between tie rods: 510x510mm | Mold thickness: 220~450mm | Daylight opening: 890mm
Chiba, Japan - Trusted Seller
2001 MITSUBISHI 3500MMⅢ-1100
used
- Manufacturer: Mitsubishi
Screw dia: 200mm | Shot volume: 31400cm3 | Platen size: 2550mm x 2450mm | Distance between tie rods: 2000mm x 1800mm | Max daylight: 3700mm | Max clamp stroke: 2700mm | Mold thickness: 1000~1900mm | Shipping mas...
Chiba, Japan - Trusted Seller
2000 Tank unit for Nissin Koki NVG750TH
used
- Manufacturer: Nichinjoh Koki
Machine Specifications ○ Unit set contents 1) Mag Separator (2) Small tank (3) Centrifuge (4) Coolant tank (4 sets) Details of each part of the unit (1) Mag separator Magnetic separator made by Noritake F-120 typ...
$1,872 USDTokyo, Japan - Trusted Seller
2010 Nagano Science LH 21 - 12 M
used
- Manufacturer: Nagano
Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...
Tokyo, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
used
- Manufacturer: Hitachi
- Model: ST-230C
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan 
IHI HS-40 Centrifugal Separator
used
- Manufacturer: IHI
- Model: HS-40
Good condition IHI HS-40 Centrifugal Separators. Located in Japan and other countries. Click request price for more information.
Japan
Tip: Enter manufacturer, model or keyword