- Trusted Seller
Shaft Mount Reducer 12.7:1 Ratio Gearbox 138 RPM Screw Conveyor Drive
- Manufacturer: GEA
In Good Used Condition. Removed from a Working Environment. -No tag on gearbox. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,425 USDMillersburg, IN - Trusted Seller
Shaft Mount Reducer 25:1 Ratio Gearbox Screw Conveyor Drive Taper Bushed
- Manufacturer: GEA
Ratio: 25:1 In Good Used Condition. Removed from a Working Environment. -No tag on gearbox. 275 Lbs. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,200 USDMillersburg, IN - Trusted Seller
Westfalia 410D | 96” Bag Flattener
- Manufacturer: GEA
Unit is USED - Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...
Hiram, OH - Trusted Seller
Plate and Frame Heat Exchanger 6 m² (64.6 ft²) Stainless Steel 316 - IPP# 703724
- Manufacturer: GEA
Max working pressure (Side A) 6 bar @ 50 degrees C; (Side B) 6 bar @ 50 degrees C Capacity (Side A) 49.8 liter; (Side B) 46.0 liter). (2) carbon steel pressure plates.
Princeton Junction, NJ - Trusted Seller
GEA WESTFALIA CSA 160-47-076
- Manufacturer: GEA
- Model: CSA 160-47-076
Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools.
Hainesport, NJ - Trusted Seller
600 Liter GEA High Shear Mixer, Model PMA 600 Advanced
- Manufacturer: GEA
600 Liter GEA High Shear Mixer, Model PMA 600 Advanced Unused 600 liter GEA high shear mixer, model PMA 600 Advanced, 316L stainless steel product contact surfaces, 240-450 liter working capacity, 36 kw main impe...
Cleveland, OH - Trusted Seller
Stainless Steel 316 GEA Pharmadule MP2/3-K2-F1/2 Dryer-Fluid Bed - IPP# 233966
- Manufacturer: GEA
Documentation shows Mills but we did not get some of them. With spare product containers. (read below) 60 kg Explosion shock resistant fluid bed dryer. Designed for cGMP production, it is a contained system, and ...
Princeton Junction, NJ - Trusted Seller
Stainless Steel 316L GEA MP 4 Dryer-Fluid Bed - IPP# 233968
- Manufacturer: GEA
Note: Drawings show Mills, we did not get some of them. Suitable for installation in Hazardous areas. Typical working volume is 30-225 liters based on the allowable product density of 1500 kg/m This fluid bed dry...
Princeton Junction, NJ WESTFALIA SEPARATOR - MPM3ZL3 Board 0/19223/0A - 4/19224/0-01 3D-18
- Manufacturer: GEA
Palmetto Automation Inc. of Duncan SC specializes in buying, selling, and repairing obsolete Used, Refurbished, and New industrial electronic equipment. Most of our used equipment goes through basic power bench t...
$218 USDDuncan, SC
GEA 350hp Twin Screw
- Manufacturer: GEA
GEA Twin Screw 350hp Ammonia compressor removed and in working condition, the company has grown and purchased a larger unit. Before removal a complete rebuild was done on the electric motor and compressor pump. ...
$2,000 USDGlencoe, MN- Trusted Seller
WESTFALIA HSA 200-06-777
- Manufacturer: GEA
- Model: HSA 200-06-777
Used Westfalia model HSA 200-06-777 stainless steel centrifuge. Intermittent solids discharge with basic design bowl clarifier design. Sanitary covers including sediment cover. Belt driven by 14/60 kW 400 volt 3/...
Hainesport, NJ 
CB 450-01-30 WESTFALIA DECANTER
- Manufacturer: GEA
- Model: CB
If We Dont Have It In our Inventory, We Can Find It For You! QUALITY CENTRIFUGES COMPETITIVE PRICINGWe sell centrifuges “as is” or we give you the option to have it rebuilt. All centrifuges are in good working or...
Rosharon, TXGEA 150 HP Screw Compressor Package
- Manufacturer: GEA
GEA 150 HP Screw Compressor package Compressor Model LR- L26S RAM 150 HP 575 Volt 3600 RPM Electric motor Complete with working GEA Micro 3 panel, Oil separator and pump Built 2012 Serial L 1211 Rated for R22...
Houston, TX- Trusted Seller
1987 Separator WESTFALIA type SA100 24-0640EUBA 24-0640EUBA
- Manufacturer: GEA
- Model: SA
Cat. no.: 24-0640EUBA Condition: Used Piece: 1 KK UNI-BOTT 060-000
Karlstadt am Main, Germany - Trusted Seller
1993 Gea Westfalia 01-776
- Manufacturer: GEA
Used Westfalia RSB?150-01-776 Disc Stack Centrifuge, Self-Cleaning, Automatic Solids Discharge Westfalia disc stack centrifuge, model RSB?150-01-776. Stainless steel product-contact parts. Max bowl speed: 4700RPM...
Mexico
Tip: Enter manufacturer, model or keyword
