Used controller

1970 GLEASON 516

• Manufacturer: Gleason-Pfauter
• Model: 516

The No, 516 Hypoid Lapper is designed primarily tor lapping automotive and truck spi­ral bevel and hypoid gears and pinions operat­ing at a 90" shaft angle with gear diameters up to 24" (609.6 mm). The No. 516 H...

GLEASON 17M

• Manufacturer: Gleason-Pfauter
• Model: 17M

Specifications: Max. Diameter of Gear: 20" Speed of Drive Spindle: 1200 rpm Max. Offset of Gear Spindle Above or Below Center of Pinion Spindle: 3 1/2" Max. Distance from Center of Gear Spindle to Nose of Pinio...

1967 GLEASON 514

• Manufacturer: Gleason-Pfauter
• Model: 514

The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizo...

1989 GLEASON 514

• Manufacturer: Gleason-Pfauter
• Model: 514

Specifications: Maximum Gear Diameter: 10.50" Maximum Pinion Diameter: 6.00" Pinion Spindle Diameter Of Taper Hole At Large End: 3.91" Pinion Spindle Depth Of Taper: 3.00" Gear Spindle Diameter Of Hole Thru...

1991 GLEASON 514

• Manufacturer: Gleason-Pfauter
• Model: 514

Specifications: Spindle Speed: 0-1800 rpm Maximum Gear Diameter: 10.50" Maximum Pinion Diameter: 6.00" Pinion Spindle Diameter Of Taper Hole At Large End: 3.91" Pinion Spindle Depth Of Taper: 3.00" Gear Sp...

1989 GLEASON 514

• Manufacturer: Gleason-Pfauter
• Model: 514

Specifications: Maximum Gear Diameter: 10.50" Maximum Pinion Diameter: 6.00" Pinion Spindle Diameter Of Taper Hole At Large End: 3.91" Pinion Spindle Depth Of Taper: 3.00" Gear Spindle Diameter Of Hole Thru...

1991 GLEASON 514

• Manufacturer: Gleason-Pfauter
• Model: 514

Specifications: Maximum Gear Diameter: 10.50" Maximum Pinion Diameter: 6.00" Pinion Spindle Diameter Of Taper Hole At Large End: 3.91" Pinion Spindle Depth Of Taper: 3.00" Gear Spindle Diameter Of Hole Thru Spi...

KAPP WM308 8" Tool-Hob-Gear Tester / Checker 14" Carry-Over Swing 32" Center

• Manufacturer: Kapp
• Model: WM 308

KAPP WM308 8" Tool-Hob-Gear Tester / Checker 14" Carry-Over Swing 32" Center KAPP WM308 8" Tool-Hob-Gear Tester / Checker 14" Carry-Over Swing 32" Center 32″ BETWEEN CENTERS 14″ CARRY OVER SWING 8-12″ MINIMUM TO...

Gleason No. 61 Angular Hypoid Tester

• Manufacturer: Gleason-Pfauter

The No. 61 Angular Hypoid Tester Is Designed To Test Large Bevel And Hypoid Gears Up To 90" Diameter And With Shaft Angles From 0 - 135 Degrees. Spur, Helical And Internal Gears Can Also Be Accommodated. The Driv...

2009 WELTER Model UHT-800 CNC Universal Bevel Gear Checker

• Manufacturer: WELTER

CNC CONTROL: Geartec CZ 4-Axis CNC Control For Pinion MD, Gear MD, Sliding Base, Pinion Offset BASIC SINGLE FLANK SOFTWARE: Single Flank Inspection With FFT Analysis Interface Software For Digital Tooth Contact D...

1961 GLEASON 516

• Manufacturer: Gleason-Pfauter
• Model: 516

The No, 516 Hypoid Lapper is designed primarily tor lapping automotive and truck spi­ral bevel and hypoid gears and pinions operat­ing at a 90" shaft angle with gear diameters up to 24" (609.6 mm). The No. 516 H...

1964 GLEASON 516

• Manufacturer: Gleason-Pfauter
• Model: 516

The No, 516 Hypoid Lapper is designed primarily for lapping automotive and truck spi­ral bevel and hypoid gears and pinions operat­ing at a 90" shaft angle with gear diameters up to 24" (609.6 mm). The No. 516 H...

2006 Gleason Sigma 3 CNC Gear Tester (2 Available)

• Manufacturer: Gleason-Pfauter
• Model: Sigma 3

SPECIFICATIONS: Gleason M&M precision systems CNC Gear Tester Model Sigma 3 New 2006 (2 machines now available) W/API Probes Machine specifications are as follows: • Machine construction using a granite base desi...

KLINGELNBERG BC Control bench

• Manufacturer: Klingelnberg
• Model: BC

CNC HYPOID BEVEL GEAR TESTER, GLEASON – 500 HCT FLANK TO FLANK

• Manufacturer: Gleason-Pfauter
• Model: 500 HCT

5 axis CNC HYPOID BEVEL GEAR TESTER – FLANK TO FLANK - Make : GLEASON PHOENIX - Model : 500 HCT - YEAR OF MANUFACTURING : 10/1998 - CNC : FANUC - Capacity – Bevel/Hypoid Gears - Gear OD (max.) 508 mm - Pinion OD...