Used Tanks & Kettles in Germany

1100 liter tank, Aisi 304

• Manufacturer: Diessel

remarks: Manhole diameter 480 mm; smaller dents in the insulation jacket; Insulated cover of the lower botton with a plate made of Fe; cut off stainless steel parts on the outside of the tank (see photos); smalle...

100 liter tank, Aisi 304

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

remarks: Hanging design on 2 supports, Aisi 304; Outlet fitting no longer available

10000 liter tank, Aisi 304

notice: some residues of previous content, bump at the insulation jacket remarks: manhole diameter approx. 520 mm; feet: upper part made of stainless steel, lower part and height-adjustable screws made of Fe; one...

12000 liter tank, Aisi 316

remarks: smaller dents in the cylinder; small rectangular sheets were welded in by the previous operator in several places of the cylinder

5600 liter tank, Aisi 304

Volume: 5.600 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Diameter inside: 1.500 mm | Cylindrical height: 3.000 mm | Total height: 4.250 mm | Manhole: in the cylinder | Outlet: flange D...

5000 liter tank, Aisi 304

remarks: Diameter manhole upper bottom appr. 425 mm, manhole cylinder appr. 310 x 425 mm; small dents in the cylinder EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking ...

5000 liter tank, Aisi 304

remarks: frame construction of the feet made of Fe (see pictures); height-adjustable screws of the feet are missing; manhole diameter 450 mm

stainless steel tank with stirrer SPS-KOLDING - type BK-1/DJ, volume: approx. 150 liters

• Manufacturer: SPS-Kolding

year of manufacture 1993.

5000 liter standing pressure tank, Aisi316

• Manufacturer: Becker Tanks

max. allowable working temperature: 50 °C Volume: 5.000 liter | Max. excess pressure: 5,0 bar | Stand type: legs height adjustable | Quantity legs: 4 Piece | Diameter inside: 1.793 mm | Cylindrical height: 1.500 ...

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

1992 Vacuum tank compressed air tank 455 L from Zeidler & Uhl – vertical 35686

• Manufacturer: Zeidler & Uhl

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...

300 liter tank, Aisi 304

remarks: Tanks slightly out of round (caps do not fit completely on the tanks; 1 x cap knob is missing); Outlet with screwed-on tap (internal diameter of pipe approx. 12 mm); Tank 1: 1 connection is pressed into ...